2000 Yamaha FZS600

Rear Brake indicates slight fluctuation of brake effort not felt at pedal (1.2.1 (e))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Rear Brake indicates slight fluctuation of brake effort not felt at pedal (1.2.1 (e))

Exhaust noisy (8.1.1 (a))

Motorcycle structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Wheel alignment slightly misaligned (2.4 (a))

Central Front Upper Motorcycle structure is so deformed it is likely to adversely affect braking or steering Frame Modified, Welding to Yoke Off Side (6.1.1 (a) (ii)) DANGEROUS

Rear Position lamp not working (4.2.1 (a))

Drive chain excessively loose (6.1.7 (c) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Headlamp aim not tested (4.1.2 (b))

Headlamp light intensity severely reduced head light dims when indicators flash (4.1.4 (a))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Mudguard insecure ()

Rear rear mudguard insecure

Drive chain worn but not considered excessive (6.2.1e)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain worn but not considered excessive (6.2.1e)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Drive chain sprocket slightly worn (6.2.1e)

Drive chain excessively tight (6.2.1d)

Exhaust markings indicating not for road use or similar wording (7.1.4)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Front Roller brake test indicates a binding brake (3.3.A1a)

Headlamp aim too low (1.6)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front suspension has a slightly reduced damping effect (2.3.6c)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Oil leak from engine. Oil/excess chain lube on left hand sidewall of rear tyre.

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Nearside Rear Lower Drive chain slightly loose (6.2.1d)

Rear Position Bulb not working but still 50%