2000 Triumph Speed Triple 955I

Clutch lever positioned so it cannot be readily operated. Bracket to handle bar Broke (6.2.1g)

Drive chain excessively loose (6.2.1d)

Front Brake hose fouling floating about near mudguard and shocker (3.2.B3b)

Front Brake lever has inadequate reserve travel (3.1.3b)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Headlamp aim headlamp deteriorated and function impaired no pattern (1.2.3a)

Nearside Lower Front mudguard insecure (2.3.7)

Rear Brake cylinder insecurely mounted (3.2.B1a)

Rear Brake pedal cannot be applied smoothly Stiff although readings are ok (3.1.3d)

Rear Brake pedal is positioned so that the brake cannot be readily applied Touching exhaust (3.1.3c)

Rear Brake pedal mounting insecure (3.1.2a)

Registration plate with character(s) which are not the correct height (6.3.4a)

Throttle operating incorrectly Loads of free play and stiff (6.2.1f)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii)) DANGEROUS

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Gear lever bent

Oil leak ()

Rear Rear wheel bearings have slight free play (2.4.A.2c)

Rear exhaust fouling fairing

Top Radiator mount bolt broke

front brake lever travel borderline excessive

Front Brake lever has inadequate reserve travel (3.1.3b)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Exhaust noisy (7.1.2)

Oil leak

seriously damaged marker on bike

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering control handlebar movement restricted by taut cables (2.1.2c)

Steering headbearing has excessive free play (2.2.2)

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Oil leak

rear mud guard slightly loose

seriously damaged marker on bike

Exhaust noisy (7.1.2)

Front wheel bearings are slightly rough (2.3.5b)

Front Direction indicator flashing more than 120 times per minute (1.5.1c)

Rear Direction indicator flashing more than 120 times per minute (1.5.1c)

Exhaust noisy (7.1.2)

Front wheel bearings are slightly rough (2.3.5b)

Rear wheel bearings have slight free play (2.4.A.2c)

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Rear wheel bearings have slight free play (2.4.A.2c)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Headlamp aim too low (1.6)

Registration plate margin less than the minimum requirement (6.3.4g)

Drive chain worn but not considered excessive (6.2.1e)

Front wheel bearings are slightly rough (2.3.5b)

Fuel cap drain blocked

Rear Brake disc(s) slightly scored (3.2.A1l)