2001 Piaggio Vespa

ENGINE OIL LEAK

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Front Wheel fixing loose (multiple fixings) (5.2.1 (a) (i))

Headlamp aim too low (4.1.2 (a))

ENGINE OIL LEAK

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Shock absorber has a reduced damping effect (5.3.2 (b))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Exhaust system insecure (6.1.2 (a))

Front Brake excessively binding (1.2.1 (f))

Offside Steering linkage locking device ineffective (2.1.3 (d))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

front brake hose likely to contact front wheel

Front suspension damping effect slightly inadequate

Steering operation restricted in free movement from lock to lock (2.1.4 (c))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Exhaust excessively deteriorated (7.1.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front suspension assembly component loose (2.3.1)

Horn is not continous or uniform (1.7.3c)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))