2012 Mazda Bongo

Emissions unable to be completed water leak (8.2.1.2 (d))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

corrosionforming on inner and outer sill panels and rear cross member

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

corrosionforming on inner and outer sill panels and rear cross member

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced 2x holes (7.1.1 (a) (i))

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced CROSS MEMBER (6.1.1 (c) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Front Headlamp reflector slightly defective BOTH (4.1.1 (b) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced CROSS MEMBER (6.1.1 (c) (i))

Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Brake lever has insufficient reserve travel (1.1.2 (a))

Emissions not tested (8.2.1.2 (d))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front front brake application uneven (3.7.B.2)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Rear fog lamp emits a light other than red (1.3.2e)

Offside Rear Rear position lamp(s) incorrect colour (1.1.A.3e)

Offside Rear Stop lamp not working (1.2.1b)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front disc corroded

Offside Rear disc corroded

Offside Rear disc corroded

front and rear discs rusty

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

front and rear discs rusty

Headlamp masks/converters fitted

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

front wishbone dustcovers starting to split

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Rear fog lamp missing (1.3.2a)

Rear fog lamp tell tale missing (1.3.1b)

Front brake discs rusty

n/s/r brake plate bent and damaged

n/s/r x menber buy rear silencer badley corroded and holed advise welding/plating not structeral as no tow bar fitted

Offside Rear fog lamp missing (1.3.2a)