MOT Status
ExpiredMileage
176,814 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Offside Play in steering rack inner joint(s) ()
Oil leak, but not excessive (8.4.1 (a) (i))
Oil leak, but not excessive Gearbox (8.4.1 (a) (i))
Steering rack has slight free play detected at steering wheel (2.3 (a) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Inner Track rod end ball joint has slight play (2.1.3 (b) (i))
Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced [rear spring] (6.1.1 (c) (i))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced [ rear spring ] (6.1.1 (c) (i))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Rear Inner Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) DANGEROUS
Offside Rear Inner Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) DANGEROUS
Offside Rear Outer Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) DANGEROUS
Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Inner Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Parking brake lever defective but can be satisfactorily operated handbrake cable /drum (1.1.6 (d))
Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Play in steering rack inner joint(s) ()
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Inner Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Outer Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Body has slight corrosion (6.1.B.2)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Tyre worn close to the legal limit both (4.1.E.1)
Steering system has slight free play detected at steering wheel (2.2.A.1b)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Play in steering rack inner joint(s)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Play in steering rack inner joint(s)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
rear pipe holed and blowing but not any louder than standard
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Centre Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
N/S/R lamp lens has slight crack
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear number plate slightly detiriorated
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda E Series?
Based on 81,836 MOT tests across 9,731 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
X858 GKK is a 2000 Mazda E Series in Silver with a 2,184cc diesel engine. This vehicle has been through 23 MOT tests with a personal pass rate of 78.3%.
Across all 2000 Mazda E Series models, the average MOT pass rate is 69.0% with a typical mileage of 98,360 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda E Series fails its MOT is brake pipe excessively corroded, accounting for 4,794 recorded failures. If you're considering buying X858 GKK, it's worth having these areas checked by a mechanic before committing.
The Mazda E Series typically stays on UK roads for around 36 years. At 26 years old, this Mazda E Series is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of X858 GKK?
You can check the full history of X858 GKK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was X858 GKK registered?
X858 GKK is a 2000 Mazda E Series, first registered on 17 November 2000.
Is X858 GKK safe to buy?
The MOT history for X858 GKK shows 23 tests with a 78.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does X858 GKK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on X858 GKK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.