2000 Mercedes-benz Vito

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer to inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Towbar excessively corroded within 30cm of towbar mounting rear valance (6.1.6 (i) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

heavy underside corrosion

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outrigger (5.3.6 (a) (i))

Offside Rear inner wheel arch holed but not within prescribed area

Rear valance corroded

heavy underside corrosion

Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outrigger (5.3.6 (a) (i))

Offside Rear inner wheel arch holed but not within prescribed area

Rear valance corroded

heavy underside corrosion

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Inner Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill area (6.1.B.2)

Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Vehicle structure has excessive corrosion which adversely affects braking or steering both sides (6.1.A.1)

Vehicle structure has excessive corrosion which adversely affects braking or steering sills inner and outer both sides (6.1.A.1)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Vehicle structure has slight corrosion (6.1.B.2)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Seat belt anchorage prescribed area is excessively corroded inner sill area. (5.2.6)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front front brake binding (3.7.B.1)

Parking brake: efficiency below requirements (3.7.B.7)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Body has a sharp edge caused by damage (6.1.C.1)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside front brake binding (3.7.B.1)

Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Towbar component insecure (6.6.1)

Exhaust has a minor leak of exhaust gases (7.1.2)

Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Vehicle structure has slight corrosion (6.1.A.1)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Direction indicator not working (1.4.A.2c)

Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Vehicle structure has slight corrosion (6.1.A.1)

Brakes imbalanced across an axle (3.7.B.5b)

Driver's door cannot be opened from inside the vehicle (6.2.B.1b)

Front passenger door cannot be opened from inside the vehicle (6.2.B.1b)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Direction indicator not working (1.4.A.2c)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

hole vehicle is in grey primer

Cold start glow plug indicator light staying on.

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Inner Ball joint has slight play (2.2.B.1f)

Hazard warning switch faulty (1.4.B.1d)

Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Side repeater missing (1.4.A.2b)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Brake pad wear indicator wire broken on nearside rear.

Cold start glow plug indicator light staying on.

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Inner Ball joint has slight play (2.2.B.1f)

N/S Front exhaust mount broken

Nearside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Hazard warning switch faulty (1.4.B.1d)

Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Offside Side repeater incorrect colour (1.4.A.2f)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

rear brake application uneven (3.7.B.2)

N/S Front exhaust mount broken

Nearside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Body has slight corrosion (6.1.B.2)

Nearside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Brake hose excessively chafed (3.6.B.4d)

Nearside Front Side repeater incorrect colour (1.4.A.2f)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake hose excessively chafed (3.6.B.4d)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Body has slight corrosion (6.1.B.2)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

front tyres starting to get close to limit

handbrake lever comes up along way but not against the stop

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Front passenger door cannot be opened from inside the vehicle (6.2.B.1b)

Nearside Front Front passenger door cannot be opened from outside the vehicle (6.2.B.1b)

Nearside Front Front position lamp(s) not working (1.1.A.3b)