2000 Peugeot Boxer

Corrosion seen from under bonnet on O,S chassis rail

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Upper Brake pipe excessively corroded (1.1.11 (c))

Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting seen from inner wheel arch (6.2.2 (d) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Corrosion seen from under bonnet on O,S chassis rail

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Subframe mounting repair covered in underseal (5.3.6 (a) (i))

front chassis corroded not within 30cm of mounting

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Subframe mounting repair covered in underseal (5.3.6 (a) (i))

front chassis corroded not within 30cm of mounting

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive under arch (5.3.6 (a) (i))

Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))

Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive inner wing (5.3.6 (a) (i))

Horn not working (7.7 (a) (ii))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))

Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive inner wing (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i))

Nearside Rear Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

all general underbody and component corrosion

Battery insecure (1.9.1)

Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Rear Lower Shock absorber has an excessively worn bush both sides (2.7.4)

all general underbody and component corrosion

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Inner Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Inner Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Horn not working (1.6.2a)

Offside Front Valve stem seriously damaged (4.1.D.1e)

Offside Inner Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

front brake fluctuating, but not excessively (3.7.B.3)

Front Body has slight corrosion (6.1.B.2)

Horn not working (1.6.2a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Body has slight corrosion (6.1.B.2)

front crossmember very corroded

Offside Inner Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

front crossmember very corroded

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Front wheel bearing has slight play (2.5.A.3c)

Nearside Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Parking brake: efficiency below requirements (3.7.C.1b)

Offside Rear fog lamp not working (1.3.2b)