2003 Subaru Impreza

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Headlamp aim too high both sides (4.1.2 (a))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Emissions unable to be completed (8.2.2.2 (e))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch (7.1.1 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch (7.1.1 (a) (i))

Nearside Rear Brake hose slightly twisted (1.1.12 (b) (i))

suspension corroded

under body corroded

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

general underbody corroded

Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement both rear (2.4.G.2)

Front Anti-roll bar linkage synthetic bush deteriorated but not resulting in excessive movement both (2.4.G.2)

Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement both rear (2.4.G.2)

Front Anti-roll bar linkage synthetic bush deteriorated but not resulting in excessive movement both (2.4.G.2)

Front Headlamp aim too low (1.8)

Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Outer Tyre worn close to the legal limit all 4 (4.1.E.1)

Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Headlamp aim too high (1.8)

Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Outer Tyre worn close to the legal limit all 4 (4.1.E.1)

Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

osr nsr tyres wearing inner edges

Exhaust noisy (7.1.4)

Nearside Rear brake disc slightly pitted (3.5.1h)

Offside Rear brake disc slightly pitted (3.5.1h)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front brake disc excessively pitted (3.5.1h)

Offside Front brake disc excessively pitted (3.5.1h)

Nearside Rear brake disc slightly pitted (3.5.1h)

Offside Rear brake disc slightly pitted (3.5.1h)

Tyre worn close to the legal limit (4.1.E.1)