2000 Suzuki Swift

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)

Nearside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill (2.4.A.3)

Nearside Stop lamp not working (1.2.1b)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)

Offside Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Offside front brake application uneven (3.7.B.2)

Offside front brakes release unevenly (3.7.B.4)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a) DANGEROUS

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear facing bush (2.4.G.2)

Offside Front Inner steering arm has play

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear facing bush (2.4.G.2)

Tyre worn close to the legal limit offside & nearside front both on 2mm (4.1.E.1)

front panel is corroded and hole but not in a prescribed area

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Inner Front Ball joint has slight play (2.2.B.1f)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

front cross member corroded

rear inner sills corroded

Centre Seat belt locking mechanism does not secure or release (5.2.5a)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Direction indicator insecure (1.4.A.2b)

Offside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Stop lamp not working (1.2.1b)

Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Inner Front Ball joint has slight play (2.2.B.1f)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

front cross member corroded

rear inner sills corroded

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

front cross member excess corrosion

Battery insecure (1.9.1)

Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

front cross member excess corrosion

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

front crossmember holed

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nail in offside rear tyre

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

advise tracking

front crossmember holed

Body has slight corrosion (6.1.B.2)

both front tyres on 3mm tread

Body has slight corrosion (6.1.B.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Oil leak

both front tyres on 2mm tread offside rear tyre on 3mm tread and cracking.

both front wiperblades slightly deteriorated

small cut nearside front tyre but not showing cord

Both front tyres have cuts in outer sidewalls but not showing inner cord

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Both front tyres have cuts in outer sidewalls but not showing inner cord

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

both wiper blades starting to split

nail in n/s/r/ tyre close to outer sidewall

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear fog lamp not working (1.3.2b)