MOT Status
ExpiredMileage
79,208 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis rail /outrigger (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch multiple holes (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is inadequately repaired inner sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis outrigger by foremost spring mount (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner rear panel /inner quarter panel (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer quarter panel behind bumper end cap (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded rearmost spring shackle mount (2.4.A.3)
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting cross member above axle (6.6.6)
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting outer rear quarter panel behind bumper end cap (6.6.6)
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting rearmost spring shackle mount (6.6.6)
Nearside Rear Vehicle structure has excessive damage seriously affecting its strength within 30cm of a towbar mounting inner rear panel/inner rear quarter panel (6.6.6)
Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail/outrigger (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch multiple holes (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded chassis rail (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner rear quarter panel behind wheelarch (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheelarch (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded outer quarter panel behind bumper end cap (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded outer wheel arch (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded spring shackle mount (2.4.A.3)
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting chassis rail (6.6.6)
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting inner rear quarter panel behind inner wheel arch (6.6.6)
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting outer quarter panel behind bumper end cap (6.6.6)
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting rearmost spring shackle mount (6.6.6)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
previous repairs heavily under sealed and skimmed with filler
Offside inner sill holed
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside inner sill holed
Exhaust system not adequately supported (7.1.1)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
rear brake application uneven (3.7.B.2)
Rear Leaf spring has a slightly deteriorated shackle pin rubber bush not resulting in excessive movement (2.4.B.2)
Underbody detiroating due to corrosion / underseal not allowing full inpection of previous repairs
Brakes imbalanced across an axle (3.7.B.5b)
Front Brake pipe inadequately clipped (3.6.B.1)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Stop lamp not working (1.2.1b)
rear brake application uneven (3.7.B.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Brake pipe inadequately clipped (3.6.B.1)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
centre exhaust rubber perrished rear exhaust in poor condition
offside rear outer sill corroding
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Brake actuating linkage mounting prescribed area is excessively corroded (3.3.A.2)
Offside front brake grabbing slightly (3.7.A.2b)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
centre exhaust rubber perrished rear exhaust in poor condition
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
o/s inner steering rack joint has slight play
Brake pipe excessively corroded (3.6.B.2c)
Exhaust emits an excessive level of metered smoke for a non-turbo charged engine (7.4.B.3b)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Suspension component mounting prescribed area is severely distorted (2.4.A.3)
Offside Headlamp aim too low (1.8)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
o/s inner steering rack joint has slight play
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear Brake pipe slightly corroded (3.6.B.2c)
How Reliable is the Ldv Cub?
Based on 52,091 MOT tests across 4,702 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
X932 CAX is a 2000 Ldv Cub in White with a 2,300cc diesel engine. This vehicle has been through 19 MOT tests with a personal pass rate of 52.6%.
Across all 2000 Ldv Cub models, the average MOT pass rate is 62.2% with a typical mileage of 88,292 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ldv Cub fails its MOT is brake pipe excessively corroded, accounting for 9,314 recorded failures. If you're considering buying X932 CAX, it's worth having these areas checked by a mechanic before committing.
The Ldv Cub typically stays on UK roads for around 28 years. At 26 years old, this Ldv Cub is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of X932 CAX?
You can check the full history of X932 CAX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was X932 CAX registered?
X932 CAX is a 2000 Ldv Cub, first registered on 8 September 2000.
Is X932 CAX safe to buy?
The MOT history for X932 CAX shows 19 tests with a 52.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does X932 CAX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on X932 CAX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.