2001 Yamaha XJR1300

Exhaust noisy baffles fitted (8.1.1 (a))

Exhaust noisy Baffles Fitted (8.1.1 (a))

Front Brake hose has slight corrosion to ferrules (1.1.12 (f) (i))

Rear Brake hose has slight corrosion to ferrules (1.1.12 (f) (i))

Exhaust noisy Baffles Fitted (8.1.1 (a))

Rear Brake hose has slight corrosion to ferrules (1.1.12 (f) (i))

Registration plate slightly loose (0.1 (a))

Exhaust noisy Baffles Fitted (8.1.1 (a))

Headlamp aim too high Bulb Wired Incorrectly (4.1.2 (a))

Rear Brake hose has slight corrosion to ferrules (1.1.12 (f) (i))

Registration plate slightly loose (0.1 (a))

Exhaust noisy (8.1.1 (a))

Exhaust noisy Baffle fitted (8.1.1 (a))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Rear reflector missing (4.8.2 (a) (ii))

Exhaust noisy (8.1.1 (a))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Exhaust noisy (7.1.2)

Rear Brake disc(s) slightly worn (3.2.A1l)

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear position lamp deteriorated but function not impaired impaired 50% (1.1.1b)

Drive chain excessively loose (6.2.1d)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear position lamp deteriorated but function not impaired impaired 50% (1.1.1b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Offside Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Throttle operating incorrectly (6.2.1f)

Exhaust slightly deteriorated (7.1.1a)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Nearside Rear shock absorber has a light misting (2.4.A.1c)

Rear Brake disc(s) has slight run out (3.2.A1m)

Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Floor brake test indicates a binding brake (3.3.C2c)

Rear Rear reflector on motorcycle missing (1.4.1)