2001 Rover Mini

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Brake hose slightly twisted (1.1.12 (b) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Front Integral body structure is corroded but structural rigidity is not significantly reduced cross member on bulk head (6.1.1 (c) (i))

Nearside Front Brake hose slightly twisted (1.1.12 (b) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced sill ,floor and inner wheel arch (6.1.1 (c) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced floor and sills (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced sill ,floor and wheel arch (6.1.1 (c) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced floor and sills (6.1.1 (c) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake hose has slight corrosion to ferrule nearside and offside (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Front Upper Suspension arm ball joint has slight play nearside and offside (5.3.4 (a) (i))

Nearside Front Upper Vehicle structure is corroded but structural rigidity is not significantly reduced bulk head cross member (6.1.1 (c) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced front to rear sills and floor (6.1.1 (c) (i))

Offside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive top cross member (1.1.21 (e) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced front to rear sills and floor (6.1.1 (c) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Rear Brake hose has slight corrosion to ferrule nearside and offside (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Registration plate deteriorated but not likely to be misread front and rear (0.1 (b))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive cross member (5.3.6 (a) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced sill and floor (6.1.1 (c) (i))

Offside Front Upper Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive bulk head cross member (1.1.21 (e) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill and floor (6.1.1 (c) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Rear Brake hose has slight corrosion to ferrule nearside and offside (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Registration plate deteriorated but not likely to be misread front and rear (0.1 (b))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Front Integral body structure is corroded but structural rigidity is not significantly reduced nearside and offside floor and sills (6.1.1 (c) (i))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive cross member (5.3.6 (a) (i))

Offside Front Upper Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive cross member (1.1.21 (e) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced floor (6.1.1 (c) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Registration plate deteriorated but not likely to be misread front and rear (0.1 (b))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive floor and sill (5.3.6 (a) (i))

Offside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (1.1.21 (e) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive floor and sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Brake pipe corroded, covered in grease or other material front to rear at rear (1.1.11 (c))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive floor and sill (5.3.6 (a) (i))

Offside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (1.1.21 (e) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive floor and sill (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Offside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Brake pipe corroded, covered in grease or other material front to rear at rear (1.1.11 (c))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive floor and sill (5.3.6 (a) (i))

Offside Front Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (1.1.21 (e) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive floor and sill (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

corrosion to rear subframe

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

corrosion to rear subframe

Emissions not tested due to water leak (8.2.1.2 (d))

Horn not working (7.7 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Sub-frame pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Sub-frame pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength boot floor (5.3.6 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Windscreen wiper not working (3.4 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

corrosion to rear subframe

Brake pipe slightly corroded front to rear (3.6.B.2c)

Nearside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive floor (5.2.6)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor sill (2.4.A.3)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive boot floor and inner wing (2.4.A.3)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Rear fog lamp missing (1.3.2a)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Brake pipe slightly corroded front to rear (3.6.B.2c)

Nearside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive floor (5.2.6)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor sill (2.4.A.3)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive boot floor and inner wing (2.4.A.3)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Nearside Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Horn not working (1.6.2a)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear rear brake binding (3.7.B.1)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Nearside Front Subframe mounting prescribed area modified, but not inappropriately (2.4.A.3)

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.3.D.1)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Headlamp insecure (1.7.3)

Nearside Indicator tell tale inoperative (1.4.A.2a)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Suspension arm has slight play in a pin/bearing (2.4.G.2)

Offside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Steering rack gaiter split (2.2.D.2d)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Headlamp aim too high (1.8)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Stop lamp not working (1.2.1b)

Offside Headlamp aim too low (1.8)

Nearside Front position lamp(s) not working (1.1.A.3b)

Horn not working (1.6.2a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)