2000 Peugeot Partner

Brake pedal anti-slip provision missing (1.1.2 (c))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Obligatory mirror insecure (3.3 (b) (ii))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Oil leaking excessively from engine (8.4.1 (a) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i))

Central Rear Brake pipe excessively corroded (1.1.11 (c))

Rear Registration plate inscription illegible (0.1 (b))

Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Rear Shock absorber has an excessively worn bush (2.7.4)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Shock absorber has a slightly worn bush (2.7.4)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Shock absorber has a slightly worn bush (2.7.4)

Towbar retaining device insecure (6.6.3a)

Nearside Front Braking system leaking n/s front flexi loose (3.6.A.1)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Stop lamp not working (1.2.1b)

Offside Stop lamp not working (1.2.1b)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Shock absorber has a slightly worn bush (2.7.4)

Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

N/s rear tyre worn and badly cracked to sidewalls

O/s front tyre wearing on edges

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Rear axle worn causing rear wheels to nearly fowl inner arch

Nearside rear Tyre very close to fouling part of the vehicle

Offside rear Tyre very close to fouling part of the vehicle

Nearside Rear Tyre fouling a part of the vehicle (4.1.D.2)

Nearside Front brake disc slightly pitted (3.5.1h)

Offside Front brake disc slightly pitted (3.5.1h)

Fuel system component leaking (7.2.3)

Exhaust emits an excessive level of metered smoke for a non-turbo charged engine (7.4.B.3b)

Fuel system component leaking (7.2.3)

Nearside Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)