2000 Honda CBR600F

Front Shock absorber has a light misting of oil (5.3.2 (b))

LHD headlamp image corrected with tape

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front shock absorber seal failed and leaking oil (2.3.3)

Headlamp aim beam image kick up to the offside (1.6)

Steering movement slightly 'notchy' (2.2.1a)

Chain has tight spot.

Exhaust noisy (7.1.2)

Front shock absorber has light misting of stanchion (2.3.3)

Motorcycle structure slightly damaged (6.1.1a)

Drive chain excessively tight (6.2.1d)

Offside Rear Footrest insecure (6.2.1a)

Exhaust noisy (7.1.2)

Front shock absorber has light misting of stanchion (2.3.3)

Motorcycle structure slightly damaged (6.1.1a)

Exhaust noisy (7.1.2)

Offside Front Direction indicators not working (1.5.1c)

Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Front Front shock absorber seal failed and leaking oil (2.3.3)

Front Headlamp aim beam image kick up to the offside (1.6)

Offside Front Direction indicators not working (1.5.1c)

Rear Exhaust noisy (7.1.2)

Nearside Front Brake disc(s) slightly pitted (3.2.A1l)

Exhaust markings indicating not for road use or similar wording (7.1.4)

Throttle operating incorrectly (6.2.1f)

Nearside Front Brake disc(s) slightly pitted (3.2.A1l)

front indicator wiring fowling onfront forks

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Exhaust slightly deteriorated (7.1.1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Headlamp aim beam image kick-up is to the offside (1.6.1)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Rear suspension bush has excessive free play (2.4.A2a(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Inner Lower Exhaust is leaking but is not excessively noisey (7.1.1b)

Inner Lower Exhaust slightly deteriorated (7.1.1a)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear Drive chain slightly loose (6.2.1d)

Front Headlamp aim beam image kick-up is to the offside (1.6.1)

Front Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Upper Throttle operating incorrectly (6.2.1f)

Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

front leaver clamp bolt alloy advise replacement asap