2000 Yamaha YZF600

Front Handlebar deformed but serviceable (2.2.1 (c) (i))

Front Mudguard insecure ()

Nearside Front Upper Clutch lever shortened (6.2.7 (b))

Offside Rear Lower Exhaust noisy (8.1.1 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Central Front Lower Exhaust has a major leak of exhaust gases Blowing to Excess under engine. (6.1.2 (a))

Front Brake pad(s) contaminated (1.1.13 (b))

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Stop lamp not working (4.3.1 (a) (ii))

Offside Front Handlebar deformed to the extent that steering is affected R/H Handle bar bent and fouling on the Fuel Tank. (2.2.1 (c) (ii)) DANGEROUS

Front Mudguard insecure ()

Nearside Front Upper Clutch lever shortened (6.2.7 (b))

Offside Rear Lower Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Clutch lever shortened (6.2.7 (b))

Front Brake binding but not excessively (1.2.1 (f))

Handlebar deformed but serviceable (2.2.1 (c) (i))

rear suspension stiff

Rear Brake disc fractured crack in disc (1.1.14 (a) (ii)) DANGEROUS

Clutch lever shortened (6.2.7 (b))

Front Brake binding but not excessively (1.2.1 (f))

Handlebar deformed but serviceable (2.2.1 (c) (i))

rear suspension stiff

Clutch lever shortened (6.2.7 (b))

Front Brake binding but not excessively (1.2.1 (f))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Rear Brake performance not tested rear brake inoperative. cannot apply (1.2.1 (g))

Clutch lever shortened (6.2.7 (b))

Front Brake binding but not excessively (1.2.1 (f))

Handlebar deformed but serviceable (2.2.1 (c) (i))

Front Nail in tyre ()

Front Tyre worn close to the legal limit very close (5.2.3 (e))

Handlebar deformed but serviceable both bars bent slightly (2.2.1 (c) (i))

Wheel alignment slightly misaligned (2.4 (a))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

drive chain very dry

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Roller brake test indicates a binding brake (3.3.A1a)

Rear Drive chain sprocket slightly worn (6.2.1e)

Drive chain excessively tight (6.2.1d)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Wheel alignment incorrect which adversely affects the handling (2.5.1)

front brake calipers want servicing.