2000 Peugeot 806

Front Windscreen washer not working (3.5 (a))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Jacking point (5.3.6 (a) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Jacking point (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

N/s inner sill heavily undersealed

O/s sill and inner sill heavily undersealed

Front Windscreen washer not working (3.5 (a))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Steering component mounting prescribed area is excessively corroded sill (2.1.2 (e) (i))

Nearside Steering component mounting prescribed area is excessively corroded Inner sill (2.1.2 (e) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive Outer sill (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))

Sills and inner sills heavily undersealed

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive Outer sill (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive outrigger (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Outrigger (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Outer sills {both} (5.3.6 (a) (i))

Exhaust emissions likely to be affected by an induction leak Intercooler pipe split (8.2.2.1 (b))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive outrigger (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Outrigger (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Outer sills {both} (5.3.6 (a) (i))

Nearside Rear Tyre worn close to the legal limit 1.97 mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit 1.97 mm (4.1.E.1)

Offside Stop lamp not working (1.2.1b)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Vehicle structure has slight corrosion (6.1.A.1)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp aim too low (1.8)

Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Headlamp aim too low (1.8)

Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Suspension joint nearside lower dust cover split/missing

Suspension joint offside lower dust cover split/missing