1992 Jaguar Xjs

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front headlamp has slight poor beam image

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp aim too low (4.1.2 (a))

Offside Headlamp insecure (4.1.1 (c))

Offside Rear Service brake excessively binding (1.2.1 (f))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Headlamp aim too high and too far to the left. (4.1.2 (a))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Seat belt buckle damaged (7.1.2 (d))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Battery insecure (1.9.1)

Emissions not tested (7.3.A.1)

Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Rear Exhaust system not adequately supported (7.1.1)

Offside Headlamp aim too low (1.8)

Offside Headlamp insecure (1.7.3)

Offside Rear Exhaust system not adequately supported (7.1.1)

Offside Rear Seat belt locking mechanism does not secure or release (5.2.5a)

Offside Front wheel bearing has slight play (2.5.A.3c)

Power steering component(s) has slight seepage from a component rack (2.3.3b)

engine mis-firing.

Front registration plate deteriorated (6.3.1d)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Seat belt damaged but not affecting the operation of the belt release mechanism outer casing (5.2.2a)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. rear brake imbalance on maximum limits (3.7.B.5b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

general floor pan corrosion

lights, lowish output

play in nearside rear hub/wheel bearing on the limit to be ok for test

Front Tyre worn close to the legal limit (4.1.E.1)

gereral body corrossion

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

front tyres wearing on inner edges

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

hand brake only just ok for test

Offside Side repeater not working (1.4.A.2c)

Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

hand brake only just ok for test

Driver's seat insecure (6.2.A.1)

hand brake only just ok

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Parking brake: efficiency below requirements (3.7.C.1b)

Rear rear parking brake recording little or no effort (3.7.B.6a)

Front Sub-frame corroded and seriously weakened (2.4.G.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)