2006 Mercedes-benz Cls

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake pedal wearing smooth worn and split (1.1.2 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Undertrays installed

Offside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake pedal wearing smooth worn and split (1.1.2 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Undertrays installed

Brake pedal wearing smooth (1.1.2 (c))

Nearside Front Service brake lagging in operation (1.2.1 (d))

Offside Front Lower Suspension component ball joint excessively worn excessive lift (5.3.4 (a) (i))

Offside Rear Outer Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Brake pedal wearing smooth (1.1.2 (c))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Brake pedal wearing smooth (1.1.2 (c))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Service brake lagging in operation (1.2.1 (d))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps both rear lamps not working (4.7.1 (b) (ii))

Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Brake pedal wearing smooth (1.1.2 (c))

Offside Rear Tyre worn close to legal limit/worn on edge inner edge worn smooth - nail in tread in non repairable area (5.2.3 (e))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Front registration plate deteriorated but not likely to be misread (6.3.1d)

under trays damaged

Engine covers fitted

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Sill covers fitted

Undertrays fitted

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Exhaust system not adequately supported Centre mounting broken (7.1.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Engine covers fitted

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Sill covers fitted

Undertrays fitted

rear exhaust bracket poor condition

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear coil spring fractured (2.4.C.1a)

Offside Rear coil spring corroded (2.4.C.1b)

offside front and both rear tyres have slight cuts on outer sidewall

Nearside Rear Wheel bolt(s) missing (4.2.A.1e)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

brake disc excessively pitted (3.5.1h)