2009 Alfa Romeo 159

Exhaust corroding and nearside rear clamp for silencer fractured but not insecure or leaking

Integral body structure is corroded but structural rigidity is not significantly reduced Rear sills (6.1.1 (c) (i))

Nearside Rear Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside front brake pad wear wire fouling inner wheel rim

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced and suspension arms (6.1.1 (c) (i))

rear sill ends starting to corrode

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Exhaust emissions exceed manufacturer's specified limit Plate limit 0.56 (8.2.2.2 (a))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Headlamp aim too high (4.1.2 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge On limit (5.2.3 (e))

Front inner brake pads appear low further inspection required

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Tyre worn close to legal limit/worn on edge Below 3mm (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Nail in tyre And tread getting low

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Parking brake only just met requirements (16%) may need some adjustment/repair

X2 rear exhaust clamps broken

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front inner brake pads appear low further inspection required

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Tyre worn close to legal limit/worn on edge Below 3mm (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge And worn heavily on inner edge (5.2.3 (e))

Offside Rear Nail in tyre And tread getting low

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Parking brake only just met requirements (16%) may need some adjustment/repair

X2 rear exhaust clamps broken

Front tyres wearing on inner edges

Offside Rear Nail in tyre

X1 nearside rear exhaust clamp broken

Items removed from driver's view prior to test

Nearside rear exhaust clamp broken

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Items removed from driver's view prior to test

Nearside rear exhaust clamp broken

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Items moved to access rear seat belt

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Items moved to access rear seat belt

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

engine cover fitted obscuring some components

front sub-frame painted in underseal

undertray fitted obscuring some underside components

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS