MOT Status
ValidMileage
107,251 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Child Seat fitted not allowing full inspection of adult belt
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Inner Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Suspension component ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Child Seat fitted not allowing full inspection of adult belt
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Inner Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front radiator support x member corroded
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Shock absorbers has slight external damage to the casing (5.3.2 (b))
Outer sill covers fitted
Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced n/s and o/s
Rear Anti-roll bar corroded but not seriously weakened both (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))
Rear Vehicle structure is repaired but structural rigidity is not significantly reduced above subframe (6.1.1 (d) (i))
Rear sill corroded
all repairs covered underseal
Nearside Front Headlamp aim too high (4.1.2 (a))
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Suspension locking device missing (5.3.6 (b))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Rear Headlamp levelling device inoperative level sensor seized and broken (4.1.5 (a))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front radiator support x member corroded
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Shock absorbers has slight external damage to the casing (5.3.2 (b))
Outer sill covers fitted
Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced n/s and o/s
Rear Anti-roll bar corroded but not seriously weakened both (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened all arms (5.3.3 (b) (i))
Rear Vehicle structure is repaired but structural rigidity is not significantly reduced above subframe (6.1.1 (d) (i))
Rear sill corroded
Central Emissions unable to be completed exhaust leak (8.2.1.2 (d))
Nearside Front Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Nearside Front Lower Suspension locking device missing ball joint (5.3.6 (b))
Nearside Headlamp aim too high (4.1.2 (a))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Rear Headlamp levelling device inoperative suspension level sensor seized and broken (4.1.5 (a))
Front radiator support x member corroded
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced n/s and o/s (5.3.3 (b) (i))
Rear Inner sills corroded n/s and o/s
Rear Vehicle structure is repaired but structural rigidity is not significantly reduced above subframe (6.1.1 (d) (i))
Suspension arm corroded but not seriously weakened all rear (5.3.3 (b) (i))
outer sill covers fitted
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Front Lower ball joint locking device missing...NT has been notified lock tight has been applied
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair Parking brake (1.2.1 (c))
Front Registration plate inscription illegible (0.1 (b))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
little reserve travel on handbrake
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Brake pipe slightly corroded both front to rear (3.6.B.2c)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear Coil spring mounting corroded and seriously weakened (2.4.C.3c)
Brake pipe slightly corroded both front to rear (3.6.B.2c)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Subaru Impreza?
Based on 915,729 MOT tests across 72,693 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
XR06 MCK is a 2006 Subaru Impreza in Silver with a 1,994cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 65.4%.
Across all 2006 Subaru Impreza models, the average MOT pass rate is 77.9% with a typical mileage of 69,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Subaru Impreza fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 28,062 recorded failures. If you're considering buying XR06 MCK, it's worth having these areas checked by a mechanic before committing.
The Subaru Impreza typically stays on UK roads for around 33 years. At 20 years old, this Subaru Impreza is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of XR06 MCK?
You can check the full history of XR06 MCK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was XR06 MCK registered?
XR06 MCK is a 2006 Subaru Impreza, first registered on 12 December 2006.
Is XR06 MCK safe to buy?
The MOT history for XR06 MCK shows 26 tests with a 65.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does XR06 MCK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on XR06 MCK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.