2001 Jaguar Xj

Rear Brake hose has slight corrosion to ferrule both rears (1.1.12 (f) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake pipe corroded, covered in grease or other material both sides slight corrosion (1.1.11 (c))

Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill corroded and holed outside and inside front middle and rear (6.2.2 (d) (i))

Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill holed inside and outside front middle and rear (6.2.2 (d) (i))

Windscreen wiper does not clear the windscreen effectively blade split (3.4 (b) (ii))

Brake pipe corroded, covered in grease or other material front to rear brake pipes and brake hose ferrules (1.1.11 (c))

Nearside Front Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

corrosion holes to both inner sills at front outside prescribed areas

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

corrosion holes to both inner sills at front outside prescribed areas

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Rear Tyre worn close to the legal limit (4.1.E.1)

Vehicle structure has slight corrosion (6.1.A.1)

Vehicle structure has slight corrosion (6.1.A.1)

Vehicle structure has slight corrosion (6.1.A.1)

front tyres worn on edges

rear propshaft coupling perished

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear wheel bearing has slight play (2.6.2)

steering rack has slight play in offside steering arm

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear wheel bearing has slight play (2.6.2)

nearside front tyre scrubbed out in inner edge

offside front tyre scrubbed out on inner edge

steering rack has slight play in offside steering arm

Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Both front tyres worn on inner edge.

Sub-frame corroded but not seriously weakened (2.4.G.1)

Suspension arm corroded but not seriously weakened (2.4.G.1)

inside edges of both front tyres worn

n/s/r tyre becoming worn

Nail in nearside front tyre