2001 Honda XL1000V

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Central Rear Exhaust has a major leak of exhaust gases Gasket (6.1.2 (a))

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Offside Front Brake disc contaminated (1.1.14 (b))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Brake excessively binding (1.2.1 (f))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Roller brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i))

Front Brake master cylinder leaking lower cylinder on left caliper (1.1.10 (b) (ii)) DANGEROUS

Rear Brake fluid not visible (1.1.10 (d) (iii)) DANGEROUS

Rear Upper Shock absorber has an excessively worn bush monoshock (5.3.2 (c))

Drive chain slightly tight (6.1.7 (k) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Headlight aftermarket HID kit fitted

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement Bushes have slight free play! (5.3.4 (a) (i))

Nearside Front Upper Steering operation fouling on the fuel tank or bodywork on full lock Handlebar mirror & hand protector hitted screen on full lock! (2.1.4 (b))

Offside Front Lower Steering operation impeded by a fairing (2.1.4 (e))

Rear Brake caliper insecure Bolt loose! (1.1.16 (c) (i))

Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) DANGEROUS

Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement Bushes have slight free play! (5.3.4 (a) (i))

Chain guard missing

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Position lamp light intensity obviously reduced 1 bulb not working (4.2.3 (a) (i))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Chain guard missing

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Position lamp light intensity obviously reduced 1 bulb not working (4.2.3 (a) (i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Exhaust has part of the system missing (7.1.1a)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates a sticking brake (3.3.A1a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1b)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Offside Front shock absorber has light misting of stanchion (2.3.3)

Exhaust slightly deteriorated (7.1.1a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Roller brake test indicates a binding brake (3.3.A1a)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Wheel alignment incorrect which adversely affects the steering (2.5.1)