2001 Mercedes-benz Clk

Exhaust mounting defective exhaust to gearbox (6.1.2 (a))

Nearside Rear Oil leak, but not excessive driveshaft seal (8.4.1 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Oil leak, but not excessive driveshaft seal (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Prop shaft flexible coupling slightly deteriorated (6.1.7 (d) (i))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Side repeater incorrect colour (4.4.3 (a))

Offside Front Position lamp not working (4.2.1 (a))

Offside Rear Inner Position lamp not working (4.2.1 (a))

Exhaust mounting defective exhaust to gearbox (6.1.2 (a))

Nearside Rear Oil leak, but not excessive driveshaft seal (8.4.1 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Oil leak, but not excessive driveshaft seal (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Prop shaft flexible coupling slightly deteriorated (6.1.7 (d) (i))

Both driveshaft seals damp

Brake pipe slightly corroded front to rear (3.6.B.2c)

Engine oil level on minimum

Gearbox to Exhaust mounting cracked

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Propshaft doughnut perished & cracking

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front wiper blade torn

Nearside Front Outer Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Side repeater slightly discoloured (1.4.A.2f)

Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)

Offside Front Outer Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)

engine management light on

Front wiper blade torn

Nearside Front Outer Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Side repeater slightly discoloured (1.4.A.2f)

Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)

Offside Front Outer Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement front bush (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

engine management light on

Offside Rear metal brake pipe corroded to flex brake hose

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear metal brake pipe corroded to flex brake hose

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

n/s/f tyre ON the legal limit

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

offside rear brake disc heavily corroded.

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front coil spring incomplete (2.4.C.1a)

Nearside Rear coil spring incomplete (2.4.C.1a)

Offside Rear coil spring incomplete (2.4.C.1a)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

front exhaust mount insecure.

offside rear brake disc heavily corroded.

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)