2001 Mercedes-benz Vito

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Headlamp aim too high (1.8)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Headlamp aim too high (1.8)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Side repeater slightly discoloured (1.4.A.2f)

Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Side repeater slightly discoloured (1.4.A.2f)

Engine covers fitted obscuring some components in the engine bay

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Passenger seat(s) missing at time of test

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Under-trays fitted obscuring some underside components

underbody corrosion not affecting any testable items

Exhaust system not adequately supported (7.1.1)

Nearside Front Headlamp not working on main beam (1.7.5a)

Nearside Rear Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

corrosion to offside front inner wheel arch. + both rear inner arches

corrosion to sills + body

corrosion to various metal brake pipes

rear seats not pressented at time of mot test,

Nearside Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Oil leak

deterioration to engine mountings

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Registration plate lamp not working (1.1.C.1d)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Oil leak

deterioration to engine mountings

Front Headlamp not working on main beam (1.7.5a)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Headlamp switch faulty (1.7.1)

Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear rear parking brake recording little or no effort (3.7.B.6a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Fuel cap/sealing device does not fasten securely by positive means (7.2.4b)

Nearside Rear Brake hose excessively deteriorated (3.6.B.4d)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear brake discs corroding.

Nearside Headlamp aim too high (1.8)

Nearside Inner Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Inner Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear rear parking brake recording little or no effort (3.7.B.6a)

Rear Brake pad(s) wearing thin (3.5.1g)

n/side inner c/v boot split

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Tyre worn close to the legal limit (4.1.E.1)

Front registration plate deteriorated (6.3.1d)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Front Windscreen wiper blade insecure (8.2.2)

Nearside Front Seat belt damaged sufficient to obstruct correct operation of the belt (5.2.2a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front registration plate insecure (6.3.1b)