2000 Fiat Ducato

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Horn not working (7.7 (a) (ii))

Nearside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

corrosion on inner sills/panels

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Front noise on strut top mount

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

corrosion on inner sills /panels

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front noise on top strut bearing

Offside Play in steering rack inner joint(s) ()

corrosion on inner sills

Exhaust has a minor leak of exhaust gases (7.1.2)

Front registration plate delaminated but not likely to be misread (6.3.1d)

Power steering component(s) has slight seepage from a component (2.3.3b)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

Nearside Headlamp aim too high (1.8)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not working (1.1.C.1d)

Service brake: efficiency below requirements (3.7.B.7)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front registration plate delaminated but not likely to be misread (6.3.1d)

Oil leak ()

Power steering component(s) has slight seepage from a component (2.3.3b)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

exhaust rubbers

both inner and outer sills covers in undrseil

Brakes imbalanced across an axle (3.7.B.5b)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside rear brake binding (3.7.B.1)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

n/s rear tyre side wall splits

Nearside Front Direction indicator excessively damaged so that it is not visible from a reasonable distance (1.4.A.2e)

Nearside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Horn not working (1.6.2a)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Offside Stop lamp slightly affected by the operation of another lamp (1.2.1f)

Horn not working (1.6.2a)

Offside Stop lamp slightly affected by the operation of another lamp (1.2.1f)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not working (1.1.5c)

Service brake: efficiency below requirements (3.7.B.7)

front flexi brake hoses perished

n/s/r tyre well worn on edges

o/s headlamp connector melted

o/s/f steel brake pipes corroded

Nearside Front Headlamp aim too high (1.8)

Exhaust mounting missing (7.1.1b)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Brake load sensing valve linkage stiff (3.6.E.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

both front fleable brake hoses peirshed

nsr tyre worn on edges

slight play in both rear wheel bearings

Nearside Front Macpherson strut is slightly stiff in the upper support bearing assembly (2.5.B.1b)

Offside Front Macpherson strut is slightly stiff in the upper support bearing assembly (2.5.B.1b)