MOT Status
ExpiredMileage
269,137 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
brake lines corroded
offside rear arch corroded, nearside rear arch corroded
under body sealed
Nearside Rear Stop lamp not working (1.2.1b)
Offside Rear Stop lamp not working (1.2.1b)
brake lines corroded
offside rear arch corroded, nearside rear arch corroded
under body sealed
Exhaust noisy (7.1.4)
Exhaust has a minor leak of exhaust gases (7.1.2)
Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.A.1)
all four wheel arches has bubbles of corrosion
both side sills has bubbles of corrsion
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Stop lamp not working (1.2.1b)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Exhaust has a minor leak of exhaust gases (7.1.2)
Exhaust noisy (7.1.4)
Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.A.1)
all four wheel arches has bubbles of corrosion
both side sills has bubbles of corrsion
Brake pipe slightly corroded (3.6.B.2c)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
O/S/R CROSS MEMBER HOLED AND CORRODED BUT NOT WITHIN 12 INCHES OF SUSPENSION OR BRAKES, TOW BAR HAD BEEN REMOVED AT RETEST!
Offside Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
all welding repairs heavily coverved in sealer, unable to check quality of welding
front bolt on slam panel rotten corroded and holed in places, but not classed as structual or with in 12inches of braking steering or suspension
rear brake discs worn and corroded
Nearside Front Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)
Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)
Brake pipe slightly corroded (3.6.B.2c)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
O/S/R CROSS MEMBER HOLED AND CORRODED BUT NOT WITHIN 12 INCHES OF SUSPENSION OR BRAKES, TOW BAR HAD BEEN REMOVED AT RETEST!
Offside Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
all welding repairs heavily coverved in sealer, unable to check quality of welding
front bolt on slam panel rotten corroded and holed in places, but not classed as structual or with in 12inches of braking steering or suspension
rear brake discs worn and corroded
Brake pedal anti-slip provision missing (3.3.A.1b)
Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Nearside Front Side repeater incorrect colour (1.4.A.2f)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Exhaust has a major leak of exhaust gases (7.1.2)
Offside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Front Direction indicator not working (1.4.A.2c)
Offside Front Side repeater incorrect colour (1.4.A.2f)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp aim too high (1.8)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)
Registration plate lamp not working (1.1.C.1d)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Parking brake lever has little reserve travel (3.1.6b)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
front panel rotten and holed in places, but classed as structual
rear brake discs worn and corroded
both inner cv boots split
coil springs corroded
corrosaion on outer and inner sills
rear brakes slight sticking
s;light corrosion on chassis
slight corrosion on front brake pipes
slight play in steering rack
slight play in track rod end
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Anti-roll bar linkage missing (2.4.G.1)
Offside Front Front position lamp(s) not working (1.1.A.3b)
both inner cv boots split
coil springs corroded
corrosaion on outer and inner sills
rear brakes slight sticking
s;light corrosion on chassis
slight corrosion on front brake pipes
slight play in steering rack
slight play in track rod end
Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)
near side dooor mirror cracked not seriously affecting driver view
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear brake disc excessively pitted (3.5.1h)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front front brake juddering severely (3.7.A.2b)
Offside Rear brake disc excessively pitted (3.5.1h)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Exhaust mounting missing (7.1.1b)
Nearside Front Brake hose excessively deteriorated (3.6.B.4d) DANGEROUS
Offside Front Brake hose excessively deteriorated (3.6.B.4d) DANGEROUS
Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)
near side dooor mirror cracked not seriously affecting driver view
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear brake disc slightly scored (3.5.1h)
Windscreen wiper blade deteriorated (8.2.2)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
Y124 NVT is a 2001 Mercedes-benz Vito in Yellow with a 2,151cc diesel engine. This vehicle has been through 18 MOT tests with a personal pass rate of 50%.
Across all 2001 Mercedes-benz Vito models, the average MOT pass rate is 63.7% with a typical mileage of 112,214 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying Y124 NVT, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 25 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of Y124 NVT?
You can check the full history of Y124 NVT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was Y124 NVT registered?
Y124 NVT is a 2001 Mercedes-benz Vito, first registered on 4 June 2001.
Is Y124 NVT safe to buy?
The MOT history for Y124 NVT shows 18 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does Y124 NVT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on Y124 NVT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.