MOT Status
ExpiredMileage
194,251 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
UNDERSIDE HAS HAD EXTENSIVE WELDING PREVIOUSLY CARRIED OUT
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))
UNDERSIDE HAS HAD EXTENSIVE WELDING PREVIOUSLY CARRIED OUT
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Brake pedal anti-slip provision missing (1.1.2 (c))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Oil leaking excessively from engine (8.4.1 (a) (i))
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering arch (6.1.1 (c) (ii)) DANGEROUS
Offside Rear Towbar is fractured and so weakened within 30cm of a towbar mounting, the towbar is likely to become detached (6.1.6 (i) (ii)) DANGEROUS
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering arch (6.1.1 (c) (ii)) DANGEROUS
Front Suspension component mounting prescribed area is excessively corroded cross member (2.4.A.3)
Fuel hose excessively damaged filler neck (7.2.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded inner wing / arch (2.4.A.3)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Front Inner Suspension component mounting prescribed area is excessively corroded wing / arch (2.4.A.3)
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
partial welding to inner wings/ arches from under side
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
both inner and outer sills corroded
both inner wings corroded and welded underneath
metal breather pipe around filler neck corroded and broken
offside rear panel corroded
rear tyres out of shape
Front position lamp(s) incorrect colour (1.1.A.3e)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Offside Front Inner Suspension component mounting prescribed area is excessively corroded arch (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
both inner and outer sills corroded
both inner wings corroded and welded underneath
metal breather pipe around filler neck corroded and broken
offside rear panel corroded
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Offside Front Radius arm has excessive play in a pin/bush (2.4.G.2)
Offside Front Steering rack gaiter split (2.2.D.2d)
Offside Rear brake caliper leaking (3.6.A.1)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Front position lamp(s) not working (1.1.A.3b)
Offside Front Headlamp not working on main beam (1.7.5a)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Battery insecure (1.9.1)
Nearside Inner Front Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Inner Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Outer Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside rear brake excessively fluctuating (3.7.B.3)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front front brake excessively fluctuating (3.7.B.3)
Offside Inner Front Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)
Offside Inner Front Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Outer Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Outer Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
front brake backplates corroded
Nearside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Headlamp not working on main beam (1.7.5a)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
offside front tyre wearing inneredge
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Front wheel bearing has slight play (2.5.A.3c)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Front Front wheel bearing has slight play (2.5.A.3c)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear registration plate missing (6.3.1a)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Front wheel bearing has slight play (2.5.A.3c)
Nearside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Front Front wheel bearing has slight play (2.5.A.3c)
Offside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear coil spring fractured (2.4.C.1a) DANGEROUS
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear brake disc excessively pitted (3.5.1h)
Nearside Rear brake disc slightly pitted (3.5.1h)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear brake disc slightly pitted (3.5.1h)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear brake disc slightly pitted (3.5.1h)
Nearside Rear brake disc slightly pitted (3.5.1h)
Offside Rear brake disc slightly pitted (3.5.1h)
How Reliable is the Mitsubishi Shogun?
Based on 1,312,716 MOT tests across 114,900 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
Y136 JEC is a 2001 Mitsubishi Shogun in Blue with a 3,200cc diesel engine. This vehicle has been through 29 MOT tests with a personal pass rate of 55.2%.
Across all 2001 Mitsubishi Shogun models, the average MOT pass rate is 71.2% with a typical mileage of 103,809 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mitsubishi Shogun fails its MOT is brake pipe excessively corroded, accounting for 75,153 recorded failures. If you're considering buying Y136 JEC, it's worth having these areas checked by a mechanic before committing.
The Mitsubishi Shogun typically stays on UK roads for around 37 years. At 25 years old, this Mitsubishi Shogun is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of Y136 JEC?
You can check the full history of Y136 JEC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was Y136 JEC registered?
Y136 JEC is a 2001 Mitsubishi Shogun, first registered on 31 May 2001.
Is Y136 JEC safe to buy?
The MOT history for Y136 JEC shows 29 tests with a 55.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does Y136 JEC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on Y136 JEC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.