2001 Honda S2000

Front Headlamp has a product on the lens but not seriously reducing light output both frosty (4.1.4 (b))

Front Suspension component mounting prescribed area is corroded but not considered excessive both inner sills (5.3.6 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both inner and outer sills at rear (5.3.6 (a) (i))

Emissions unable to be completed car over heating (8.2.1.2 (d))

Rear fog lamp likely to become detached (4.5.1 (c) (ii))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Suspension component mounting prescribed area is corroded but not considered excessive both inner sills (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge ON the min, limit (5.2.3 (e))

Rear fog light Insecure

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge ON the min, limit (5.2.3 (e))

Rear fog light Insecure

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced end of sill in wheel arch (6.1.1 (c) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear fog lamp insecure (4.5.1 (c) (i))

Emissions not tested car overheating (8.2.1.2 (d))

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced end of sill in wheel arch (6.1.1 (c) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear fog lamp insecure (4.5.1 (c) (i))

Front Brake pad(s) wearing thin all (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge outer edge worn smooth (5.2.3 (e))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Emissions not tested (8.2.1.2 (d))

Offside Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Brake pad(s) wearing thin all (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge outer edge worn smooth (5.2.3 (e))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

car over heating

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner arch (6.1.1 (c) (i))

Nearside Rear Parking (secondary brake) (secondary) brake grabbing slightly (1.3.1 (c))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to the legal limit tyre outer sidewall cracking,tyre was soft (4.1.E.1)

Offside handbrake performance is low

Nearside Brake pipe excessively corroded front to rear at the rear (3.6.B.2c)

Offside Brake pipe leaking front to rear at the rear (3.6.A.1)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Offside handbrake performance is a little low

Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Battery insecure (1.9.1)

Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Hand brake only just met required limit

Front Headlamp cleaning device inoperative (1.7.2)

Hand brake only just met required limit

Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Braking system leaking (3.6.A.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Steering arm has relative movement at its fixings (2.2.B.1h)

Nearside Drag link end ball joint has slight play (2.2.B.1f)

Nearside Front Drag link end ball joint has slight play (2.2.B.1f)

rear none structual suspension support bent