2001 Chrysler Grand Voyager

Exhaust has a minor leak of exhaust gases at seams and joints (7.1.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front Headlamp deteriorated but light output not reduced both sides outer lenses misted up (1.7.5a)

Front brake disc worn, pitted or scored, but not seriously weakened both sides (3.5.1i)

Front coil spring corroded both sides (2.4.C.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt pin hole split and grease seepages (2.5.C.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak around engine areas ()

Rear Brake pad(s) wearing thin (3.5.1g)

exhaust all system poor and rusty

offside front upper corner of windscreen damaged just outside zonal areas

Exhaust has a minor leak of exhaust gases at seams and joints (7.1.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front Tyre worn close to the legal limit both sides (4.1.E.1)

Front coil spring corroded both sides (2.4.C.1b)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt pin hole split and grease seepages (2.5.C.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

both front tyres wearing low at outer edges

damages to front windscreen in offside upper corner [not in zonal areas]

exhaust all system poor and rusty

general wear and score marks on both front brake discs

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Leaf spring deteriorated but not seriously weakened (2.4.B.1a)

Offside Rear Leaf spring deteriorated but not seriously weakened (2.4.B.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Leaf spring deteriorated but not seriously weakened (2.4.B.1a)

Nearside Stop lamp not working (1.2.1b)

Offside Rear Leaf spring deteriorated but not seriously weakened (2.4.B.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Offside Front position lamp(s) not working (1.1.A.3b)

both front tyres outer wall deteriorated

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

both front tyres outer wall deteriorated

offside rear tyre worn on edges

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

offside rear tyre worn on edges

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

centre brake light inop and lens missing

front discs corroded

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Steering rack deformed but serviceable (2.2.C.1d)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Rear Brake pipe slightly corroded (3.6.B.2c)

rear of body rusting near rear swinging shackles

rear wiper blade split

unable to inspect middle seatbelts fully because of child seats

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Tyre tread depth below requirements of 1.0mm (4.1.E.2b)

Nearside Rear Tyre tread depth below requirements of 1.0mm (4.1.E.2b)

Offside Front Tyre tread depth below requirements of 1.0mm (4.1.E.2b)

Offside Rear Tyre tread depth below requirements of 1.0mm (4.1.E.2b)