2001 Honda NSR125

Head bearings too tight

offside headlamp bulb not working

Horn control not functioning. (1.7.2b)

Rear Drive chain excessively loose (6.2.1d)

Rear Rear wheel bearings have excessive free play (2.4.A.2c)

Rear Wheel alignment incorrect which adversely affects the handling (2.5.1)

Head bearings too tight

offside headlamp bulb not working

Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Front Direction indicator not working (1.5.1c)

Front wheel bearings are excessively rough (2.3.5b)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Direction indicator not working (1.5.1c)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear position lamp insecure (1.1.1c)

Rear wheel bearings have excessive free play (2.4.A.2c)

Rear wheel spindle securing nut locking device missing (2.4.A.2b)

Registration plate deteriorated (6.3.1d)

Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Rear wheel bearings have slight free play (2.4.A.2c)

Steering movement slightly 'notchy' (2.2.1a)

Drive chain excessively loose (6.2.1d)

Front Roller brake test indicates a binding brake (3.3.A1a)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Rear wheel bearings have excessive free play (2.4.A.2c)

Riders seat insecure (6.2.1a)

Steering headbearing has excessive free play (2.2.2)

Direction indicators not working (1.5.1c)

Exhaust markings indicating not for road use or similar wording (7.1.4)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Nearside Lower Fairings insecure and likely to impede the steering (2.1.2e)

Rear reflector on motorcycle missing (1.4.1)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Stop lamp affected by the operation of another lamp (1.3.2)

Front Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.2)

Front Roller brake test indicates a severely grabbing brake (3.3.A1b)

Front Steering control fouling between components which interferes with the free movement of the steering (2.1.2a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Rear reflector on motorcycle missing (1.4.1)