MOT Status
ValidMileage
122,178 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Suspension component mounting repair covered in underseal all chassis (5.3.6 (a) (i))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Steering component mounting prescribed area is excessively corroded steering box. (2.1.2 (e) (i))
Front Brake disc worn, but not excessively both discs. (1.1.14 (a) (i))
Front Brake lining(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
fuel tank carrier corroded.
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Lower Steering linkage ball joint ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Front Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))
Offside Front Steering component mounting prescribed area is corroded but not considered excessive chassis /steering box (2.1.2 (e) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Lower Steering linkage ball joint ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Front Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))
Offside Front Steering component mounting prescribed area is corroded but not considered excessive chassis /steering box (2.1.2 (e) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Nearside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis (6.2.2 (d) (i))
Offside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis (6.2.2 (d) (i))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
fuel tank cover corroded
Nearside Front Lower Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis (6.2.2 (d) (i))
Offside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis (6.2.2 (d) (i))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
fuel tank cover corroded
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
chassis slightly corroded
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
chassis slightly corroded
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Rear coil spring corroded (2.4.C.1b)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
exhaust corroded
fuel tank corroded
n/s/ chassis corroding
o/s/ chassis corroding
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Power steering pipe(s) or hose(s) slightly corroded (2.3.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Stop lamp not working (1.2.1b)
Offside Rear position lamp(s) not working (1.1.A.3b)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Lower Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Front Lower Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
rear exhaust mount broken
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Obligatory mirror missing (8.1.1)
Offside Rear Stop lamp not working (1.2.1b)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
body to chassie mounting perished and worn
engine management light on.
f/o/s shalf shaft outer U.J shows signs of wear/movement (red dust)
r/n/s back plate damp
r/n/s tyre has approx 2mm of tread left
sections of the exhaust system noted rusty
slight oil leaks from front and rear diffs and engine
tapley test carried out
body to chassie mounting perished and worn
engine management light on.
f/o/s shalf shaft outer U.J shows signs of wear/movement (red dust)
r/n/s back plate damp
r/n/s tyre has approx 2mm of tread left
sections of the exhaust system noted rusty
slight oil leaks from front and rear diffs and engine
tapley test carried out
Offside Front Shock absorber has a light misting of oil (2.7.3)
engine electronics light illuminated
slight oil leak rear main seal
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Front Panhard rod has slight play in a pin/bush (2.4.G.2)
Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear Upper Anti-roll bar has slight play in a pin/bush (2.4.G.2)
How Reliable is the Chrysler-jeep Wrangler?
Based on 22,884 MOT tests across 1,547 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
Y165 SEH is a 2001 Chrysler-jeep Wrangler in Black with a 3,960cc petrol engine. This vehicle has been through 28 MOT tests with a personal pass rate of 67.9%.
Across all 2001 Chrysler-jeep Wrangler models, the average MOT pass rate is 72.3% with a typical mileage of 54,980 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Chrysler-jeep Wrangler fails its MOT is brake pipe excessively corroded, accounting for 792 recorded failures. If you're considering buying Y165 SEH, it's worth having these areas checked by a mechanic before committing.
The Chrysler-jeep Wrangler typically stays on UK roads for around 33 years. At 25 years old, this Chrysler-jeep Wrangler is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of Y165 SEH?
You can check the full history of Y165 SEH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was Y165 SEH registered?
Y165 SEH is a 2001 Chrysler-jeep Wrangler, first registered on 28 March 2001.
Is Y165 SEH safe to buy?
The MOT history for Y165 SEH shows 28 tests with a 67.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does Y165 SEH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on Y165 SEH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.