2001 Mercedes-benz Vito

Brake load sensing valve stiff (1.1.17 (c) (ii))

Brake pipe corroded, covered in grease or other material Both front to rear brake pipes (1.1.11 (c))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive Outer & inner sill (7.1.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Both rear inner wheel arches & offside front outer sill (5.3.6 (a) (i))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Centre of inner sill slightly corroded

Drive shaft joint constant velocity boot severely deteriorated Both front inner joint boots (6.1.7 (g) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

All welding repairs coated in underseal

Drive shaft joint constant velocity boot severely deteriorated Both front inner boots (6.1.7 (g) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front cross member slightly corroded

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive Sill inner & outer (7.1.1 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive Inner sill (7.1.1 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge On legal limit (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive Inner wheel arch (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre slightly out of shape

Suspension component mounting prescribed area is corroded but not considered excessive Both sides inner and outer sills (2.4.A.3)

Vehicle structure has slight corrosion Under bonnet cross member (6.1.A.1)

Welding repairs coated in underseal

Offside Front Seat belt anchorage prescribed area is excessively corroded Inner sill (5.2.6)

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive Inner wheel arch (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre slightly out of shape

Suspension component mounting prescribed area is corroded but not considered excessive Both sides inner and outer sills (2.4.A.3)

Vehicle structure has slight corrosion Under bonnet cross member (6.1.A.1)

both sills and underside of van showing signs of corrosion.

Horn not working (1.6.2a)

Nearside Front Direction indicator not working (1.4.A.2c)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

both sills and underside of van showing signs of corrosion.

both outer sills are slighty corroded

underside of vehicle is coated in surface rust

Brake pipe slightly corroded (3.6.B.2c)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

off side rear tyre slightly misshapen

outer sills and inner sills corroding

Brake pipe slightly corroded (3.6.B.2c)

Brake load sensing valve seized (3.6.E.3)

Brake pipe slightly corroded (3.6.B.2c)

Horn not working (1.6.2a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

near side front tyre inner tread worn low

off side rear tyre slightly misshapen

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

near side front tyre inner tread worn low

off side rear tyre slightly misshapen

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

off side rear tyre slightly misshapen

Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

off side rear tyre slightly misshapen

Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

handbrake lack of response till full travel

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

handbrake lack of response till full travel

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Rear brake disc slightly pitted (3.5.1h)

Offside Rear brake disc slightly pitted (3.5.1h)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

slight handbrake travel

temporary repairs to both rear lamps

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Rear Registration plate lamp not working (1.1.5c)

Nearside Rear brake disc slightly pitted (3.5.1h)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Registration plate lamp not working (1.1.5c)

Offside Rear brake disc slightly pitted (3.5.1h)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

slight handbrake travel

temporary repairs to both rear lamps

Offside Rear Registration plate lamp not working (1.1.C.1d)