MOT Status
ExpiredMileage
295,292 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point by front subframe (6.1.1 (c) (i))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i))
Nearside Headlamp aim too high (4.1.2 (a))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i))
Offside Headlamp aim not tested (4.1.2 (b))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength jacking point (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Drag link end ball joint has slight play (2.1.3 (b) (i))
Offside Drag link end ball joint has slight play (2.1.3 (b) (i))
Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear shock absorber casing corroded
Offside Rear shock absorber casing corroded
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced unsatisfactory repair (6.1.1 (c) (i))
Nearside Side repeater not working (4.4.1 (a) (ii))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced unsatisfactory repair (6.1.1 (c) (i))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear shock absorber casing corroded
Offside Rear shock absorber casing corroded
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Side repeater incorrect colour (4.4.3 (a))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Direction indicator slightly discoloured (4.4.3 (a))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear shock absorber casing corroded
Offside Front Direction indicator slightly discoloured (4.4.3 (a))
Offside Rear shock absorber casing corroded
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Subframe mounting prescribed area is excessively corroded n/s and os (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Rear Suspension component mounting prescribed area is excessively corroded n/s and o/s inner sills (2.4.A.3)
Seat belt anchorage prescribed area is excessively corroded n/s and o/s inner sills (5.2.6)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
nearside rear shock absorber sleeve corroded
offside rear shock absorber sleeve corroded and adrift from fixing
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Rear Brake pipe slightly corroded (3.6.B.2c)
both front brake discs worn
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Bonnet retaining device ineffective (8.4.2)
Service brake: efficiency below requirements (3.7.B.7) DANGEROUS
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
o/s front brake slightly binding
o/s rear tyre wall damaged
Nearside Headlamp not in good working order (not working) (1.2.4a)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
o/s front brake slightly binding
o/s rear tyre wall damaged
Both wiper blades split on the lower edge.
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Offside Front position lamp(s) not working (1.1.A.3b)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Service brake: efficiency below requirements (3.7.B.7) DANGEROUS
o/s inner cv gaitor split
offside inner C.V gaitor insecure.
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
Y191 PAE is a 2001 Mercedes-benz Vito in Green with a 2,151cc diesel engine. This vehicle has been through 22 MOT tests with a personal pass rate of 59.1%.
Across all 2001 Mercedes-benz Vito models, the average MOT pass rate is 63.7% with a typical mileage of 112,214 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying Y191 PAE, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 25 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of Y191 PAE?
You can check the full history of Y191 PAE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was Y191 PAE registered?
Y191 PAE is a 2001 Mercedes-benz Vito, first registered on 4 May 2001.
Is Y191 PAE safe to buy?
The MOT history for Y191 PAE shows 22 tests with a 59.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does Y191 PAE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on Y191 PAE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.