2001 Mercedes-benz A-class

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Stop lamp not working (1.2.1b)

Emissions not tested Overheating/coolant leak (7.3.A.1)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Headlamp aim too high (1.8)

Nearside front brake binding when rotated by hand

Offside Headlamp aim too high (1.8)

Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement front of front (2.4.G.2)

Under trays fitted obscuring some components

rear silensor corroded

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

offside wiper rubber splitting

rear exhaust silencer deteriorated

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too high (1.8)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front coil spring incomplete (2.4.C.1a)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Registration plate lamp not working (1.1.C.1d)

Bonnet cannot be secured in the closed position (8.4.1) DANGEROUS

Offside Rear Brake pipe excessively corroded (3.6.B.2c) DANGEROUS

All covers and undertrays fitted at time of test

Front and rear suspension and crossmembers corroded

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Oil close to the minimum

Rear coil spring corroded (2.4.C.1b)

Nearside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Offside Registration plate lamp not working (1.1.C.1d)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside front brake juddering slightly (3.7.A.2b)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside front brake juddering slightly (3.7.A.2b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Stop lamp not working (1.2.1b)

Offside Rear Suspension arm has excessive play in a pin/bush (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Rear Exhaust system not adequately supported (7.1.1)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Coil spring not correctly located (2.4.C.2)