2001 Mercedes-benz Vito

Heavy corrosion suspension components

Heavy corrosion underside

Nearside Side repeater slightly discoloured (1.4.A.2f)

Nearside tyre sidewall damaged

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside outer sill corroded not within any prescibed area

Brake load sensing valve seized (3.6.E.3)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Inner Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Rear Brake pipe inadequately supported (3.6.B.1)

Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Heavy corrosion suspension components

Heavy corrosion underside

Nearside Side repeater slightly discoloured (1.4.A.2f)

Nearside tyre sidewall damaged

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside outer sill corroded not within any prescibed area

Corrosion on suspension components

Front number plate cracked

Heavy corrosion underside

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Front Brake hose ferrule excessively corroded (3.6.B.4e)

Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake pipe excessively corroded (3.6.B.2c)

Corrosion on suspension components

Front number plate cracked

Heavy corrosion underside

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

o/s outer sill rusty

Driver's door cannot be opened from inside the vehicle (6.2.B.1b)

Driver's door does not latch securely closed (6.2.B.1a)

Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Rear Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Nearside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

o/s outer sill rusty

Front Shock absorber has a slightly reduced damping effect (2.7.5)

Nail in offside rear tyre

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

front brake disc's worn

nearside & offside front sills corroded

offside front inner driveshaft boot split

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Direction indicators not working (1.4.A.2c)

Registration plate lamp not working (1.1.C.1d)

Nail in offside rear tyre

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

front brake disc's worn

nearside & offside front sills corroded

offside front inner driveshaft boot split

Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nail in nearside front tyre

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Suspension joint offside upper dust cover split/missing

front number plate slight damage

offside front tyre has slight sidwall damage

Centre Exhaust system not adequately supported (7.1.1)

Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nail in nearside front tyre

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Suspension joint offside upper dust cover split/missing

front number plate slight damage

offside front tyre has slight sidwall damage

both rear shock absorber outer cases corroded

corrosion underside in several places

offside front brake pipe corroded

offside front wheel bent on inner and outer rims

some corrosion on brake pipes at rear

Offside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

both rear shock absorber outer cases corroded

corrosion underside in several places

offside front brake pipe corroded

offside front wheel bent on inner and outer rims

some corrosion on brake pipes at rear

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Exhaust mounting missing (7.1.1b)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Rear brake disc excessively pitted (3.5.1h)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Windscreen wiper blade insecure (8.2.2)

foot brake travel.

front brake discs worn.

front tyres wearing.

rear exhaust rusty.

rear metal brake pipe rusty.