2001 Mazda B Series

Exhaust has a major leak of exhaust gases join between mid and rear (6.1.2 (a))

Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Rear Body mounting fixings insecure tub and mounting corroded (6.2.2 (c) (i))

Offside Body mounting fixings insecure tub and mounting corroded (6.2.2 (c) (i))

Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting mid mount (6.2.2 (d) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

General corrosion on under body and tub

Offside Rear Light unit damaged not affecting use

Rear diff leaking

centre and rear exhaust corroded

Body mounting fixing insecure, but overall security not significantly reduced mounts and rear tub corroded on both sides (6.2.2 (c) (i))

Central Exhaust mounting defective (6.1.2 (a))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

General chassis corroded

Nearside Front Body mounting fixing insecure, but overall security not significantly reduced (6.2.2 (c) (i))

O,S,R light unit damaged

Offside Front Body mounting fixing insecure, but overall security not significantly reduced (6.2.2 (c) (i))

Rear diff leak

centre and rear exhaust corroded

Fuel system component leaking tank area (6.1.3 (b) (i))

Body mounting fixing insecure, but overall security not significantly reduced mounts and rear tub corroded on both sides (6.2.2 (c) (i))

Central Exhaust mounting defective (6.1.2 (a))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

General chassis corroded

Nearside Front Body mounting fixing insecure, but overall security not significantly reduced (6.2.2 (c) (i))

O,S,R light unit damaged

Offside Front Body mounting fixing insecure, but overall security not significantly reduced (6.2.2 (c) (i))

Rear diff leak

centre and rear exhaust corroded

Offside Front Body mounting fixing insecure, but overall security not significantly reduced body next to body mount corroded (6.2.2 (c) (i))

Rear diff leak

Rear light units damaged but not showing white light

centre to rear exhaust corroded on join

rear tub to body mount corroded

Fuel system component leaking from tank area (6.1.3 (b) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Offside Front Body mounting fixing insecure, but overall security not significantly reduced body next to body mount corroded (6.2.2 (c) (i))

Rear diff leak

Rear light units damaged but not showing white light

centre to rear exhaust corroded on join

rear tub to body mount corroded

Rear diff corroded and weeping gear oil

Rear tub on both sides corroded

Brake pipe excessively corroded Rear laden valve to flexi (1.1.11 (c))

Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced lower cross member (6.1.1 (c) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Rear diff corroded and weeping gear oil

Rear tub on both sides corroded

o,s,r body mounts corroded

Fuel system component leaking fuel pipe (6.1.3 (b) (i))

o,s,r body mounts corroded

Offside Rear floor plan corroded and holed

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member holed (6.1.1 (c) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member holed (6.1.1 (c) (i))

Offside Rear floor plan corroded and holed

chassis has general corrosion

front idle arms have slight play

Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cross member (6.1.B.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

chassis has general corrosion

front idle arms have slight play

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

front idle arms have slight play in ball joints

general chassis corroded not holed

Nearside Front tyre getting low

Exhaust system not adequately supported (7.1.1)

Offside front brake binding (3.7.B.1)

center and rear exhaust bracket broken not inscure

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

center and rear exhaust bracket broken not inscure

Centre Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Leaf spring cracked (2.4.B.1a)

Nearside front brake binding (3.7.B.1)

Offside Front front brake binding (3.7.B.1)

Both front brake discs heavily corroded on inner edges.

Front All position lamps not working (1.1.A.3b)

Rear All position lamps not working (1.1.A.3b)

Rear Registration plate lamp not working (1.1.5c)