2001 Honda CBR600FS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust noisy (8.1.1 (a))

Fitted with rear seat cowling - tested as single seat type machine. Fuel cap surround slightly loose. Rear light / brake light wiring connections reversed. O/S/F indicator / side light not working.

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Wheel alignment slightly misaligned (2.4 (a))

Drive chain slightly tight (6.1.7 (k) (i))

Exhaust noisy (8.1.1 (a))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Wheel has a slightly distorted bead rim R/H side - of rear wheel (5.2.2 (c) (i))

Front Brake lever is positioned so that the brake cannot be readily applied Front brake lever hitting on throttle cables - when brake applied fully (1.1.2 (d))

Front Footrest insecure R/H footrest mounting / brake pedal pivot bolt loose (6.2.12 (a))

Front Tyre not fitted in accordance with side wall instructions Tyre / wheel fitted backwards (5.2.3 (i))

Throttle operating incorrectly Loose on handlebars (6.2.7 (a) (i))

Rear brake flex incorrectly fitted

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake hose excessively twisted (1.1.12 (b) (ii))

Fuel tank insecure (6.1.3 (a) (i))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Riders seat with a defective supporting structure (6.2.5 (a) (i))

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Exhaust Slightly Noisy

Front Brake Lever slightly Damaged

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Exhaust Slightly Noisy

Front Brake Lever slightly Damaged

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Headlamp aim too high and too far to the right (4.1.2 (a))

Exhaust noisy (7.1.2)

Front Brake lever is damaged but the brake can still be readily applied (3.1.3c)

anodised brake bolts fitted

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Headlamp aim too low (1.6)

Steering movement slightly 'notchy' (2.2.1a)

anodised brake lines fitted

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Steering movement slightly 'notchy' (2.2.1a)

anodised brake lines fitted

Rear Tyre worn close to the legal limit (4.1.3(ii))