2001 Subaru Legacy

Front Brake disc worn, pitted or scored, but not seriously weakened BOTH SIDE (1.1.14 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened both side (1.1.14 (a) (ii))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened BOTH SIDE (1.1.14 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened both side (1.1.14 (a) (ii))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Anti-roll bar ball joint has slight play both side (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened both side (1.1.14 (a) (ii))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Rear Rear Anti-roll bar ball joint has slight play both

Rear Anti-roll bar ball joint has slight play both (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Registration plate deteriorated but not likely to be misread both (0.1 (b))

Emissions not tested (8.2.1.2 (d))

Headlamp aim not tested (4.1.2 (b))

Headlamp lens seriously defective both (4.1.1 (b) (ii))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Rear Anti-roll bar ball joint has slight play both (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Registration plate deteriorated but not likely to be misread both (0.1 (b))

Headlamp deteriorated but light output not reduced (1.7.5a)

engine bay and under body covers fitted not allowing full inspection

Front Brakes imbalanced across an axle Axle 1 (3.7.B.5b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside front brake binding (3.7.B.1)

Offside Stop lamp not working (1.2.1b)

front brake application uneven (3.7.B.2)

front brakes release unevenly (3.7.B.4)

Headlamp deteriorated but light output not reduced (1.7.5a)

engine bay and under body covers fitted not allowing full inspection

engine bay and under body covers fitted not allowing

Central Stop lamp not working (1.2.1b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front position lamp(s) not working (1.1.A.3b)

Nearside Front Inner Brake pad(s) less than 1.5 mm thick worn to the metal (3.5.1g) DANGEROUS

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

engine bay and under body covers fitted not allowing

engine bay and under body covers fitted not allowing full inspection

Offside Stop lamp not working (1.2.1b)

engine bay and under body covers fitted not allowing full inspection

Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

centre exhaust very rusty at flange

fuel filler neck rusty

n/s/r tyre worn on edges

o/s/f tyre worn inner edge

Emissions not tested (7.3.A.1)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear fog lamp not working (1.3.2b)

o/s/f tyre worn inner edge

Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

fuel filler neck rusty

n/s/r tyre worn on edges

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)