2001 Gilera Runner 125

Central Front Front shock absorber has light misting of stanchion both (2.3.3)

Nearside Front Brake lever is short but brake can still be readily applied (3.1.3c)

Offside Front Brake lever is damaged but the brake can still be readily applied (3.1.3c)

engine mounts rubbers slightly deteriorated

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Headlamp deteriorated and function impaired Headlamp has incorrect pattern (1.2.3a)

Horn is not a constant note (1.7.3c)

Nearside Front Direction indicator incorrect colour (1.5.1b)

Offside Front Direction indicators not working (1.5.1c)

Rear position lamp incorrect colour (1.1.2b)

Front Brake disc(s) cracked (3.2.A1g) DANGEROUS

Engine mount rubber bushes slightly deteriorated

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front shock absorber has light misting of stanchion Both (2.3.3)

Rear Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Brake lever is bent but brake can still be readily applied (3.1.3c)

Small cut in front tyre sidewall.

Speedometer cable adrift.

Various underside panel damage.

Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Front shock absorber seal failed and leaking oil (2.3.3)

Front suspension has inadequate damping effect. (2.3.6c)

Headlamp aim too high (1.6)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Brake lever is bent but brake can still be readily applied (3.1.3c)

Small cut in front tyre sidewall.

Speedometer cable adrift.

Various underside panel damage.

Tyre has ply or cord exposed (4.1.2a(iii)

Exhaust noisy (7.1.2)

Front tyre perished

Side Stand damaged

Brake lever is bent but brake can still be readily applied (3.1.3c)

Dipswitch does not deflect the main beam/s, making them into dipped beam/s (1.2.2b(ii))

Front shock absorber seal failed and leaking oil (2.3.3)

Steering headbearing has excessive free play (2.2.2)

Brake lever is bent but brake can still be readily applied (3.1.3c)

Exhaust noisy (7.1.2)

Front tyre perished

Side Stand damaged

Offside Front shock absorber has light misting of stanchion (2.3.3)

Front Tyre has ply or cord exposed (4.1.2a(iii)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Headlamp switch faulty (1.2.4)

Horn is not a constant note (1.7.3c)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Exhaust mounting deteriorated. (7.1.1.c)

Front Brake disc(s) slightly pitted (3.2.A1l)

Exhaust mounting deteriorated. (7.1.1.c)

Front Brake disc(s) slightly pitted (3.2.A1l)

Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4)

Front shock absorber seal failed and leaking oil (2.3.3)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Nearside Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Front suspension has a slightly reduced damping effect (2.3.6c)

Offside Rear shock absorber has a light misting (2.4.A.1c)

Steering movement slightly 'notchy' (2.2.1b)

Exhaust is leaking and excessively noisey (7.1.1b)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Steering movement slightly 'notchy' (2.2.1b)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp switch faulty (1.2.4)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear reflector on motorcycle obscured (1.4.1)

Rear shock absorber has a light misting (2.4.A.1c)