MOT Status
ExpiredMileage
118,760 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Aftermarket plastic undertrays zip tied into place not allowing full inspection.
Brake pipe corroded, covered in grease or other material Thick layer of grease or similar (1.1.11 (c))
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security underside (6.2.2 (d) (i))
plastic patches and trims bonded to underside and sills not allowing full inspection
Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))
Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))
Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis rail (6.1.1 (c) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Service brake efficiency below requirements (1.2.2 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing and turret (5.3.6 (a) (i))
Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch to chassis and lower arm mounting (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength after wheel inner sill (5.3.6 (a) (i))
Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and center inner sill (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch into turret (5.3.6 (a) (i))
Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of wheel inner sill/ chassis area (5.3.6 (a) (i))
Brake hose slightly deteriorated all (3.6.B.4d)
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
all steering components slightly corroded
all suspension components slightly corroded
front radiator crossmember corroded
Brake pedal creeps down when held under pressure (3.3.B.1a)
Front Brakes imbalanced across an axle (3.7.B.5b)
Front Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Leaf spring anchor bracket corroded and seriously weakened (2.4.B.6d)
Offside Front Anti-roll bar linkage insecure (2.4.G.1)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Rear Leaf spring anchor bracket corroded and seriously weakened (2.4.B.6d)
Offside Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brakes imbalanced across an axle (3.7.B.5b)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Service brake: efficiency below requirements (3.7.B.7)
Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
front radiator crossmember corroded
Nearside Front Subframe mounting prescribed area is excessively corroded rear wheel arch area (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded Rear wheel arch area (2.4.A.3)
Suspension arm rubber bush deteriorated resulting in excessive movement N/S Front Wishbone REAR bush worn to excess (2.4.G.2)
N/S/F Tyre cracking
Oil leak
Parking brake lever has little reserve travel (3.1.6b)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) DANGEROUS
N/S/F Tyre cracking
Oil leak
Parking brake lever has little reserve travel (3.1.6b)
Nearside Rear rear brake grabbing slightly (3.7.A.5b)
O/S/F Tyre cracking on sidewall
O/S/R Tyre cracking on sidewall
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear rear brake grabbing slightly (3.7.A.5b)
O/S/F Tyre cracking on sidewall
O/S/R Tyre cracking on sidewall
Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Offside Front rear brake binding (3.7.B.1)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Oil leak
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
underside of vehicle corroded
oil leak
towbar wires insurce
Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Steering rack insecure (2.2.B.1a)
Rear Brake pipe slightly corroded (3.6.B.2c)
oil leak
towbar wires insurce
underside of vehicle corroded
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.B2)
Rear Exhaust has a part missing (7.1.1a)
Windscreen washer provides insufficient washer liquid (8.2.3)
How Reliable is the Ldv Cub?
Based on 52,091 MOT tests across 4,702 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
Y246 KUJ is a 2001 Ldv Cub in White with a 2,300cc diesel engine. This vehicle has been through 25 MOT tests with a personal pass rate of 52%.
Across all 2001 Ldv Cub models, the average MOT pass rate is 63.3% with a typical mileage of 80,498 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ldv Cub fails its MOT is brake pipe excessively corroded, accounting for 9,314 recorded failures. If you're considering buying Y246 KUJ, it's worth having these areas checked by a mechanic before committing.
The Ldv Cub typically stays on UK roads for around 28 years. At 25 years old, this Ldv Cub is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of Y246 KUJ?
You can check the full history of Y246 KUJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was Y246 KUJ registered?
Y246 KUJ is a 2001 Ldv Cub, first registered on 18 April 2001.
Is Y246 KUJ safe to buy?
The MOT history for Y246 KUJ shows 25 tests with a 52% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does Y246 KUJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on Y246 KUJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.