2001 Mazda 626

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive chassis leg (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive chassis leg (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (2.4.A.3)

Offside Rear child seat fitted {seat belt not checked }

Nearside Front Brake pipe inadequately clipped flex pipe (3.6.B.1)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside rear brake binding (3.7.B.1)

Offside Front Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear wheel bearing rough when rotated (2.6.1) DANGEROUS

engine oil leak(sump very rusty)

Fuel tank leaking (7.2.3)

Nearside Front Mechanical brake component has restricted free movement (3.5.1k)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Parking brake: efficiency below requirements (3.7.D.4)

Rear registration plate displaying a honeycomb or similar effect background (6.3.3)

Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)

Offside Rear Vehicle structure has slight corrosion (6.1.B.2)

TYRES OF DIFFERENT SPEED RATINGS

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside rear outer edge has corrosion but not within prescribed area

Offside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside and nearside rear chassis legs have areas of slight corrosion

Parking brake lever has little reserve travel (3.1.6b)

offside and nearside floor has slight corroison

Nearside Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Sump corroded and has slight leak

nearside rear tyre worn on inner edge

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

both rear arches corroded

Front Brakes imbalanced across an axle (3.7.B.5b)

Parking brake lever has no reserve travel (3.1.6b)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

both rear arches corroded

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside front brake juddering slightly (3.7.A.2b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside front brake juddering slightly (3.7.A.2b)

Offside Rear Lower Anti-roll bar has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

n/s/f washer jet partially blocked

o/s/r handbrake lever starting to stick

slight front brake imbalance

Nearside Headlamp excessively damaged so that the light output is severely reduced (1.7.5a)