2001 Yamaha DT125

Drive chain excessively loose (6.1.7 (c) (i))

Rear Rear reflector missing (4.8.2 (a) (ii))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Rear Wheel spoke slightly loose. (4.2.1b)

Rear suspension bush has slight free play lower shock (2.4.A2a(i))

Steering movement slightly stiff (2.2.1a)

Wheel alignment slightly misaligned. (2.5.1)

no lights fitted at time of test

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Offside Rear Direction indicator not working (1.5.1c)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Direction indicators flashing more than 120 times per minute (1.5.1c)

Drive chain excessively loose (6.2.1d)

Rear Brake component leaking fluid (3.2.B4)

Rear Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Rear Brake pad(s) contaminated by oil or grease (3.2.A1k)

Rear Registration plate character(s) likely to be misread (6.3.4b)

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Rear Drive chain sprocket slightly worn (6.2.1e)

Wheel alignment slightly misaligned. (2.5.1)

Centre Front Upper Front position lamp does not illuminate immediately when switched on (1.1.3a)

Nearside Rear Upper Direction indicator missing (1.5.1a)

Offside Front Upper Brake lever has inadequate reserve travel (3.1.3b)

Offside Rear Upper Direction indicator missing (1.5.1a)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Nearside Front Direction indicator not working (1.5.1c)

Offside Front Direction indicator not working (1.5.1c)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front Brake disc(s) slightly scored (3.2.A1l)

Front Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Front Wheel has a slightly eccentric bead rim. (4.2.2)

Rear Wheel spoke slightly loose. (4.2.1b)

Steering movement slightly 'notchy' (2.2.1a)

Front Brake disc(s) slightly scored (3.2.A1l)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Direction indicators flashing less than 60 times a minute (1.5.1c)

Headlamp dipped beam affected by the operation of another lamp (1.2.2c)

Headlamp main beam affected by the operation of another lamp (1.2.2c)

Horn is not a constant note (1.7.3c)

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Tyre is incorrectly seated on the wheel rim (4.1.2b)

Stop lamp affected by the operation of another lamp (1.3.2)

Front Brake disc(s) slightly scored (3.2.A1l)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

clutch lever mount loose

Front Brake disc(s) slightly scored (3.2.A1l)

Front Brake lever is damaged but the brake can still be readily applied (3.1.3c)

Front Brake hose slightly chafed (3.2.B3a)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front Wheel spoke slightly loose. (4.2.1b)

Clutch lever positioned so it cannot be readily operated. (6.2.1g)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp aim not tested (1.6)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Rear Direction indicator not working (1.5.1c)

Position lamp switch insecure (1.1.4b)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Throttle operating incorrectly (6.2.1f)

Front Brake hose slightly chafed (3.2.B3a)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front Wheel spoke slightly loose. (4.2.1b)

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Nail in rear tyre

Front Front position lamp does not illuminate immediately when switched on (1.1.3a)

Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Wheel has an excessively distorted bead rim. (4.2.2)

Rear Brake performance not tested (3.3)

Rear Registration plate missing (6.3.1a)

Rear Wheel alignment slightly misaligned. (2.5.1)

rear tyre has illegal tread pattern