2013 Honda Integra

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened Pitted (1.1.14 (a) (ii))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened Pitted (1.1.14 (a) (ii))

Oil leak, but not excessive Slight oil leak from engine (8.4.1 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened Pitted (1.1.14 (a) (ii))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened Pitted (1.1.14 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Outer Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Exhaust noisy (8.1.1 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Outer Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Emissions not tested Emissions check abandoned due to centre exhaust system blowing (8.2.1.2 (d))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Rear fog lamp does not emit a steady red light (4.5.4 (a))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Exhaust noisy (8.1.1 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Outer Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Exhaust has a minor leak of exhaust gases joint between centre and rear exhaust system (6.1.2 (a))

Front Lower ball joint covers perishing "both sides"

Front wiper linkage looks worn

Offside Rear fog light showing white light

Engine management light on

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Central Rear Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Engine management light on

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Front both front tyres on 2.0mm in tread , limit1.6mm

Front can only just see headlight beam pattern "both sides" on headlight beam tester

Nearside Front tyre had to be blown up before doing test , it has a screw in it

Nearside Rear tyre wearing uneven on inside

Offside Rear fog light bulb starting to show white light

engine management light staying on

exhaust noise

non catalyst test carried out due to no match being found on emissions tester

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Front both front lower ball joint covers perishing

Nearside Rear tyre wearing uneven on inside

Rear Brake pad(s) wearing thin (3.5.1g)

Rear exhaust silencer mounting bracket broken

engine management light staying on

non cat test carried out as no match for vehicle found on emission tester

Offside rear fog light starting to show white light

Only 1of2 offside front washer jets working

eml light on

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)