2001 Peugeot 306

Exhaust has a major leak of exhaust gases (7.1.2)

Front constant velocity joint is insecure (2.5.C.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front coil spring fractured (2.4.C.1a)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Stop lamp not working (1.2.1b)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Fuel cap/sealing device mounting flange/sealing method defective (7.2.4c)

Nearside Front Front constant velocity joint is insecure (2.5.C.1b)

Nearside Front Headlamp aim too low (1.8)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front coil spring incomplete (2.4.C.1a)

Offside Front Front constant velocity joint is insecure (2.5.C.1b)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Stop lamp not working (1.2.1b)

Offside Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

rear end damaged

Nearside Front Lower Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

front discs lipped

Front registration plate font not substantially similar to the prescribed font (6.3.4d)

Front registration plate with character(s) which are not the correct height (6.3.4a)

Front registration plate with character(s) which are not the correct stroke width (6.3.4a)

Front registration plate with character(s) which are not the correct width (6.3.4a)

Fuel system component insecure (7.2.1)

Nearside Front Headlamp aim too low and too far to the left. (1.8)

Nearside Front Headlamp insecure (1.7.3)

Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Rear Stop lamp not working (1.2.1b)

Rear registration plate font not substantially similar to the prescribed font (6.3.4d)

Rear registration plate with character(s) which are not the correct height (6.3.4a)

Rear registration plate with character(s) which are not the correct stroke width (6.3.4a)

Rear registration plate with character(s) which are not the correct width (6.3.4a)

Brakes imbalanced across an axle (3.7.B.5b)

Front Direction indicators incorrect colour (1.4.A.2f)

Front registration plate character(s) not correctly formed (6.3.4b)

Fuel cap/sealing device does not fasten securely by positive means (7.2.4b)

Nearside Front Headlamp aim too low (1.8)

Nearside Front Headlamp insecure (1.7.3)

Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Outer Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Rear Direction indicators incorrect colour (1.4.A.2f)

Rear registration plate character(s) not correctly formed (6.3.4b)

front brake application uneven (3.7.B.2)

front brakes release unevenly (3.7.B.4)

Battery insecure

Both front brakes are lightly binding on u/l?

Front Shock absorber has a slightly reduced damping effect (2.7.5)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

O/S/R quarter panel & bumper are damaged?

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Front Brake pad(s) wearing thin (3.5.1g)

long travel on hand brake