2001 Rover Mini

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust mounting defective front and rear mounts broken (6.1.2 (a))

Integral body structure is repaired but structural rigidity is not significantly reduced Floor (6.1.1 (d) (i))

Nearside Front Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner wheel arch (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Outer Integral body structure inadequately repaired such that structural rigidity is significantly reduced sill (6.1.1 (d) (i))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced panel (6.1.1 (d) (i))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Outer Integral body structure is repaired but structural rigidity is not significantly reduced sill (6.1.1 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust mounting defective box (6.1.2 (a))

exstensive welding done under neath

gennerly corroded under neath

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Offside Headlamp aim too high (4.1.2 (a))

Offside Rear Service brake lagging in operation (1.2.1 (d))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Brakes imbalanced across an axle (3.7.B.5b)

Front registration plate insecure (6.3.1b)

Nearside Brake cable has a seized clevis joint pivot (3.5.1c)

Nearside Rear Road wheel bead rim badly distorted (4.2.A.1a)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Brake cable has a seized clevis joint pivot (3.5.1c)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Road wheel slightly damaged (4.2.A.1a)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Centre Exhaust has a major leak of exhaust gases (7.1.2)