2003 Mazda MX-5

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear fog lamp tell-tale not working (4.9.1 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Rear exhaust joint area corroded

Nearside Front position lamp(s) not working (1.1.A.3b)

Rear exhaust joint area corroded

Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive inner arch (2.4.A.3)

Nearside front brake binding (3.7.B.1)

Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive inner arch (2.4.A.3)

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside front brake binding (3.7.B.1)

Offside Registration plate lamp not working (1.1.C.1d)

Offside front brake binding (3.7.B.1)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

both front brakes slightly binding

Nearside Headlamp aim too high (1.8)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too high (1.8)

both front brakes slightly binding

Brakes imbalanced across an axle (3.7.B.5b)

Nearside front brake binding (3.7.B.1)

Offside Front front brake binding (3.7.B.1)

Offside Rear Registration plate lamp shows direct white light to the rear (1.1.C.1f)

Offside Rear rear brake binding (3.7.B.1)

front brake application uneven (3.7.B.2)

rear brake application uneven (3.7.B.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front front brake binding (3.7.B.1)

Offside Rear Registration plate lamp not fitted (1.1.C.1b)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Rear Brake pad(s) wearing thin (3.5.1g)