MOT Status
ExpiredMileage
132,932 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brakes imbalanced across an axle (3.7.B.5b)
Front passenger door cannot be opened from outside the vehicle (6.2.B.1b)
Nearside Body has a projection caused by corrosion (6.1.C.1)
Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Body has a projection caused by corrosion (6.1.C.1)
Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear position lamp(s) excessively damaged so that it is not visible from a reasonable distance (1.1.A.3d)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside rear brake recording little or no effort (3.7.B.5a)
Parking brake: efficiency below requirements (3.7.B.7)
Registration plate lamp not working (1.1.C.1d)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
corrosion underneath vehicle and on body
Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust system not adequately supported (7.1.1)
Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
corrosion underneath vehicle and on body
Brake pipe slightly corroded (3.6.B.2c)
Front Brake pad(s) wearing thin (3.5.1g)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
o/s and n/s inner cv boots split
o/s sill and underneath rusty
rear brake discs very rusty
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Anti-roll bar linkage insecure (2.4.G.1)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
rear brake recording little or no effort (3.7.B.5a)
Brake pipe slightly corroded (3.6.B.2c)
Front Brake pad(s) wearing thin (3.5.1g)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
o/s and n/s inner cv boots split
o/s sill and underneath rusty
rear brake discs very rusty
Brake pipe slightly corroded (3.6.B.2c)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
both inner front drive shaft gaitors split
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Brake pipe slightly corroded (3.6.B.2c)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
both inner front drive shaft gaitors split
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Centre Exhaust mounting missing (7.1.1b)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside rear brake recording little or no effort (3.7.B.5a)
Offside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front position lamp(s) not working (1.1.A.3b)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
Y36 PFE is a 2001 Mercedes-benz Vito in Blue with a 2,151cc diesel engine. This vehicle has been through 14 MOT tests with a personal pass rate of 50%.
Across all 2001 Mercedes-benz Vito models, the average MOT pass rate is 63.7% with a typical mileage of 112,214 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying Y36 PFE, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 25 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of Y36 PFE?
You can check the full history of Y36 PFE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was Y36 PFE registered?
Y36 PFE is a 2001 Mercedes-benz Vito, first registered on 1 March 2001.
Is Y36 PFE safe to buy?
The MOT history for Y36 PFE shows 14 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does Y36 PFE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on Y36 PFE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.