2001 Mitsubishi L300

Central Exhaust mounting defective (6.1.2 (a))

Offside Front Cab steps insecure corroded (6.2.8 (a) (i))

Offside Rear Body component slightly loose Bumper end cap missing (6.2.1 (a) (i))

Nearside Rear Body panel corroded and likely to cause injury (6.2.1 (a) (i))

Nearside Rear Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Central Exhaust mounting defective (6.1.2 (a))

Nearside Rear Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Offside Front Cab steps insecure corroded (6.2.8 (a) (i))

Offside Rear Body component slightly loose Bumper end cap missing (6.2.1 (a) (i))

o/s front tyre worn

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

front pads look very low(n/s )

o/s front tyre worn

Oil leak, but not excessive (8.4.1 (a) (i))

all body-panels damaged and slightly corroded

under-body slightly corroded

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material wheel arch (1.1.11 (c))

Offside Front door shut corroded but not in prescribed area

Brake pipe excessively corroded across rear axle (1.1.11 (c))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Brake pipe excessively corroded front to rear compensater valve (1.1.11 (c))

Nearside Front Anti-roll bar corroded and seriously weakened (5.3.3 (b) (i))

Nearside Front Lower Macpherson strut pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Brake pipe excessively corroded front to rear compensater valve (1.1.11 (c))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))

Offside Rear Stop lamp(s) showing white light to the rear (4.3.3 (a) (ii))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material wheel arch (1.1.11 (c))

Offside Front door shut corroded but not in prescribed area

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Brake pipe excessively corroded to rear (3.6.B.2c)

Nearside Front Lower Shock absorber has an excessively worn bush (2.7.4)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded front spring hanger (2.4.A.3)

Offside Brake pipe excessively corroded front to rear (3.6.B.2c)

Offside Rear Suspension spring mounting prescribed area is excessively corroded font spring hanger (2.4.A.3)

Offside Rear position lamp(s) incorrect colour lens damaged (1.1.A.3e)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Brake pipe slightly corroded to rear (3.6.B.2c)

Nearside Front Lower Shock absorber has a slightly worn bush (2.7.4)

Offside Front Brake pipe slightly corroded to rear (3.6.B.2c)

Rear Brake pipe slightly corroded pipe between flex hose and valve (3.6.B.2c)

Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush (2.4.B.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Brake pipe slightly corroded to rear (3.6.B.2c)

Nearside Front Lower Shock absorber has a slightly worn bush (2.7.4)

Offside Front Brake pipe slightly corroded to rear (3.6.B.2c)

Rear Brake pipe slightly corroded pipe between flex hose and valve (3.6.B.2c)

Exhaust has a minor leak of exhaust gases (7.1.2)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside wiper blade deteriorated

Slight wear in both lower swivel joints

Nearside wiper blade deteriorated

Slight wear in both lower swivel joints

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Exhaust has a minor leak of exhaust gases (7.1.2)

Driver's seat insecure (6.2.A.1)

Rear fog lamp switch faulty (1.3.1a)

Nearside Headlamp aim too low (1.8)

Nearside Stop lamp not working (1.2.1b)

Offside Headlamp aim too low (1.8)

Offside Stop lamp not working (1.2.1b)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too high (1.8)

Ball joint has excessive play (2.2.B.1f)

Nearside Stop lamp not working (1.2.1b)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear Exhaust has part of the system excessively deteriorated (7.1.1a)

Upper Stop lamp not working (1.2.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)