2001 Daihatsu Hijet

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Offside Rear Brake performance unable to be tested brake pipe split leaking brake fluid (1.2.1 (g))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Service brake lagging in operation (1.2.1 (d))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Windscreen washer not working (3.5 (a))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Lower Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Front Upper Suspension component mounting prescribed area is corroded but not considered excessive Both sides, around top strut mounts (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced o/s/f inner sill and front of both rear inner wheel arches (6.1.1 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material at compensator valve (1.1.11 (c))

engine mil light on

Nearside Front Lower Suspension arm insecurely attached inner bush insecure (5.3.3 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis inside wheel arch (5.3.6 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Front Lower Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Front Upper Suspension component mounting prescribed area is corroded but not considered excessive Both sides, around top strut mounts (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced o/s/f inner sill and front of both rear inner wheel arches (6.1.1 (c) (i))

Offside Rear Brake pipe corroded, covered in grease or other material at compensator valve (1.1.11 (c))

engine mil light on

n/s & o/s rear inner wheel arches corroded

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

both front brakes biding

centre petrol pipe corroded

front bumper support corroded incomplete

nearside front indicator lamp broken

nearside rear/offside rear brake pipe unions corroded

offside rear tyre deterioated

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front front brake recording little or no effort (3.7.B.5a)

Front registration plate deteriorated (6.3.1d)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

both front brakes biding

centre petrol pipe corroded

front bumper support corroded incomplete

nearside front indicator lamp broken

nearside rear/offside rear brake pipe unions corroded

offside rear tyre deterioated

wiper blades split

front radiator support panel badly corroded

Offside Rear Direction indicator excessively damaged so that it is not visible from a reasonable distance (1.4.A.2e)

Rear Brake load sensing valve seized (3.6.E.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear rear brake recording little or no effort (3.7.B.5a)

Service brake: efficiency below requirements (3.7.B.7)

front radiator support panel badly corroded

front radiator support x member corroded

Nearside Front position lamp(s) not working (1.1.A.3b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

front radiator support x member corroded

Nearside Front Suspension arm has excessive play in a track control arm inner bush (2.5.B.2b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Suspension arm has excessive play in a track control arm inner bush (2.5.B.2b)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

slight leak from radiator

Nearside Headlamp aim too high (1.8)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

slight leak from radiator

spare tyre punctured

Rear Brake load sensing valve linkage seized (3.6.E.3)

Rear Exhaust system not adequately supported (7.1.1)

Rear fog lamp not working (1.3.2b)

Service brake: efficiency below requirements (3.7.B.7)

Brakes imbalanced across an axle (3.7.B.5b)

Front front brake application uneven (3.7.B.2)

Nearside Front Direction indicator missing (1.4.A.2b)

Nearside Front Headlamp aim too high (1.8)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Registration plate lamp not working (1.1.5c)

Offside Front Direction indicator incorrect colour (1.4.A.2f)