2001 Yamaha XJR1300

Central Lower Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Headlamp lens slightly defective Mount broken (4.1.1 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Headlamp switch does not immediately illuminate all dipped beam headlamps Intermittently doesn't switch to dipped beam immediately (4.1.3 (a))

Nearside Headlamp lens slightly defective Headlight mount broken (4.1.1 (b) (i))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Registration plate does not conform to the specified requirements (0.1 (d))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Front Tyre worn close to the legal limit Starting to split/perish (5.2.3 (e))

Nearside Front Brake caliper covered in oil - probably from fork seal, but does not appear to be on brake pads

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Tyre perished and cracking on tread

Front Tyre worn close to the legal limit (5.2.3 (e))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Drive chain excessively tight (6.1.7 (k) (i))

Headlamp aim too high (4.1.2 (a))

Central Rear Lower REAR TYRE VALVE SPLIT HAVE CARRIED OUT A PRS

Offside Front Lower Shock absorber has a light misting of oil (5.3.2 (b))

Offside Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Exhaust is leaking and excessively noisey (7.1.1b)

Registration plate incorrect (6.3.1a)

Rear Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c) DANGEROUS

Registration plate incorrect (6.3.1a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Headlamp aim too low (1.6)

Rear reflector on motorcycle missing (1.4.1)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Roller brake test indicates a binding brake (3.3.A1a)